From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Thu, 7 Feb 2019 07:49:36 +0000 From: Lee Jones Subject: Re: [PATCH v7 1/6] mfd: lochnagar: Add initial binding documentation Message-ID: <20190207074936.GB4672@dell> References: <20190130114128.21083-1-ckeepax@opensource.cirrus.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20190130114128.21083-1-ckeepax@opensource.cirrus.com> To: Charles Keepax Cc: sboyd@kernel.org, mturquette@baylibre.com, robh+dt@kernel.org, mark.rutland@arm.com, linus.walleij@linaro.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, patches@opensource.cirrus.com, devicetree@vger.kernel.org List-ID: On Wed, 30 Jan 2019, Charles Keepax wrote: > Lochnagar is an evaluation and development board for Cirrus > Logic Smart CODEC and Amp devices. It allows the connection of > most Cirrus Logic devices on mini-cards, as well as allowing > connection of various application processor systems to provide a > full evaluation platform. This driver supports the board > controller chip on the Lochnagar board. > > Signed-off-by: Charles Keepax > --- > > Changes since v6: > - Correct regulator bindings to match already merged regulator code > > Thanks, > Charles > > .../devicetree/bindings/mfd/cirrus,lochnagar.txt | 68 +++++++++++ > include/dt-bindings/clk/lochnagar.h | 26 ++++ > include/dt-bindings/pinctrl/lochnagar.h | 132 +++++++++++++++++++++ > 3 files changed, 226 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt > create mode 100644 include/dt-bindings/clk/lochnagar.h > create mode 100644 include/dt-bindings/pinctrl/lochnagar.h Applied, thanks. -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog