* [PATCH AUTOSEL 3.18 1/4] ARM: dts: da850-evm: Correct the sound card name
@ 2019-02-09 18:50 Sasha Levin
2019-02-09 18:50 ` [PATCH AUTOSEL 3.18 2/4] ARM: dts: kirkwood: Fix polarity of GPIO fan lines Sasha Levin
0 siblings, 1 reply; 2+ messages in thread
From: Sasha Levin @ 2019-02-09 18:50 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Peter Ujfalusi, Sekhar Nori, Sasha Levin, devicetree
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
[ Upstream commit 7fca69d4e43fa1ae9cb4f652772c132dc5a659c6 ]
To avoid the following error:
asoc-simple-card sound: ASoC: Failed to create card debugfs directory
Which is because the card name contains '/' character, which can not be
used in file or directory names.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/da850-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 4f935ad9f27b..505ea30c9cb2 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -146,7 +146,7 @@
sound {
compatible = "simple-audio-card";
- simple-audio-card,name = "DA850/OMAP-L138 EVM";
+ simple-audio-card,name = "DA850-OMAPL138 EVM";
simple-audio-card,widgets =
"Line", "Line In",
"Line", "Line Out";
--
2.19.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH AUTOSEL 3.18 2/4] ARM: dts: kirkwood: Fix polarity of GPIO fan lines
2019-02-09 18:50 [PATCH AUTOSEL 3.18 1/4] ARM: dts: da850-evm: Correct the sound card name Sasha Levin
@ 2019-02-09 18:50 ` Sasha Levin
0 siblings, 0 replies; 2+ messages in thread
From: Sasha Levin @ 2019-02-09 18:50 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Linus Walleij, Jamie Lentin, Guenter Roeck, Jason Cooper,
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth,
Julien D'Ascenzio, Sasha Levin, devicetree
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit b5f034845e70916fd33e172fad5ad530a29c10ab ]
These two lines are active high, not active low. The bug was
found when we changed the kernel to respect the polarity defined
in the device tree.
Fixes: 1b90e06b1429 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan")
Cc: Jamie Lentin <jm@lentin.co.uk>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Julien D'Ascenzio <jdascenzio@posteo.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jamie Lentin <jm@lentin.co.uk>
Reported-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Tested-by: Julien D'Ascenzio <jdascenzio@posteo.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/kirkwood-dnskw.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 113dcf056dcf..1b2dacfa6132 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -35,8 +35,8 @@
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
pinctrl-names = "default";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW
- &gpio1 13 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0
3000 1
6000 2>;
--
2.19.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-02-09 18:50 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-02-09 18:50 [PATCH AUTOSEL 3.18 1/4] ARM: dts: da850-evm: Correct the sound card name Sasha Levin
2019-02-09 18:50 ` [PATCH AUTOSEL 3.18 2/4] ARM: dts: kirkwood: Fix polarity of GPIO fan lines Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).