From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Mon, 11 Feb 2019 11:43:50 +0100 From: Guido =?iso-8859-1?Q?G=FCnther?= Subject: [PATCH] dt-bindings: input: Refer to touchscreen.txt for goodix ts Message-ID: <20190211104350.GA1330@bogon.m.sigxcpu.org> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit To: Dmitry Torokhov , Rob Herring , Mark Rutland , linux-input@vger.kernel.org, devicetree@vger.kernel.org, Bastien Nocera List-ID: Refer to touchscreen.txt for generic touch properties. This avoids duplication and we're using the generic code to parse these in the driver. While at that add touchscreen-size-{x,y} which are respected by the driver as well. Signed-off-by: Guido G�nther --- .../bindings/input/touchscreen/goodix.txt | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt index f7e95c52f3c7..bc7796b98a00 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -18,11 +18,14 @@ Optional properties: - irq-gpios : GPIO pin used for IRQ. The driver uses the interrupt gpio pin as output to reset the device. - reset-gpios : GPIO pin used for reset - - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) - (swapping is done after inverting the axis) + - touchscreen-inverted-x + - touchscreen-inverted-y + - touchscreen-size-x + - touchscreen-size-y + - touchscreen-swapped-x-y + +The touchscreen-* properties are documented in +Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt Example: -- 2.20.1