From: Mathieu Othacehe <m.othacehe@gmail.com>
To: thierry.reding@gmail.com, robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Mathieu Othacehe <m.othacehe@gmail.com>
Subject: [PATCH 1/2] dt-bindings: pwm: hibvt: Add hi3559v100 support
Date: Tue, 12 Feb 2019 10:49:26 +0100 [thread overview]
Message-ID: <20190212094927.5900-1-m.othacehe@gmail.com> (raw)
Add support for hi3559v100-shub-pwm and hisilicon,hi3559v100-pwm
platforms.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
---
Documentation/devicetree/bindings/pwm/pwm-hibvt.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
index fa7849d67836..daedfef09bb6 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt
@@ -5,6 +5,8 @@ Required properties:
The SoC specific strings supported including:
"hisilicon,hi3516cv300-pwm"
"hisilicon,hi3519v100-pwm"
+ "hisilicon,hi3559v100-shub-pwm"
+ "hisilicon,hi3559v100-pwm
- reg: physical base address and length of the controller's registers.
- clocks: phandle and clock specifier of the PWM reference clock.
- resets: phandle and reset specifier for the PWM controller reset.
--
2.17.1
next reply other threads:[~2019-02-12 9:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-12 9:49 Mathieu Othacehe [this message]
2019-02-12 9:49 ` [PATCH 2/2] pwm: hibvt: Add hi3559v100 support Mathieu Othacehe
2019-02-12 14:28 ` Uwe Kleine-König
2019-02-13 12:30 ` Thierry Reding
2019-02-13 17:23 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190212094927.5900-1-m.othacehe@gmail.com \
--to=m.othacehe@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).