From: Krzysztof Kozlowski <krzk@kernel.org>
To: Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] iio: adc: exynos-adc: Use proper number of channels for Exynos4x12
Date: Tue, 12 Feb 2019 18:45:49 +0100 [thread overview]
Message-ID: <20190212174550.4383-2-krzk@kernel.org> (raw)
In-Reply-To: <20190212174550.4383-1-krzk@kernel.org>
Exynos4212 and Exynos4412 have only four ADC channels so using
"samsung,exynos-adc-v1" compatible (for eight channels ADCv1) on them is
wrong. Add a new compatible for Exynos4x12.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../bindings/iio/adc/samsung,exynos-adc.txt | 4 +++-
drivers/iio/adc/exynos_adc.c | 17 +++++++++++++++++
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt
index a10c1f89037d..e1fe02f3e3e9 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.txt
@@ -11,11 +11,13 @@ New driver handles the following
Required properties:
- compatible: Must be "samsung,exynos-adc-v1"
- for exynos4412/5250 controllers.
+ for Exynos5250 controllers.
Must be "samsung,exynos-adc-v2" for
future controllers.
Must be "samsung,exynos3250-adc" for
controllers compatible with ADC of Exynos3250.
+ Must be "samsung,exynos4212-adc" for
+ controllers compatible with ADC of Exynos4212 and Exynos4412.
Must be "samsung,exynos7-adc" for
the ADC in Exynos7 and compatibles
Must be "samsung,s3c2410-adc" for
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index fa2d2b5767f3..01f7c2570a1e 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -115,6 +115,7 @@
#define MAX_ADC_V2_CHANNELS 10
#define MAX_ADC_V1_CHANNELS 8
#define MAX_EXYNOS3250_ADC_CHANNELS 2
+#define MAX_EXYNOS4212_ADC_CHANNELS 4
#define MAX_S5PV210_ADC_CHANNELS 10
/* Bit definitions common for ADC_V1 and ADC_V2 */
@@ -271,6 +272,19 @@ static void exynos_adc_v1_start_conv(struct exynos_adc *info,
writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
}
+/* Exynos4212 and 4412 is like ADCv1 but with four channels only */
+static const struct exynos_adc_data exynos4212_adc_data = {
+ .num_channels = MAX_EXYNOS4212_ADC_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
+ .needs_adc_phy = true,
+ .phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
+
+ .init_hw = exynos_adc_v1_init_hw,
+ .exit_hw = exynos_adc_v1_exit_hw,
+ .clear_irq = exynos_adc_v1_clear_irq,
+ .start_conv = exynos_adc_v1_start_conv,
+};
+
static const struct exynos_adc_data exynos_adc_v1_data = {
.num_channels = MAX_ADC_V1_CHANNELS,
.mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
@@ -492,6 +506,9 @@ static const struct of_device_id exynos_adc_match[] = {
}, {
.compatible = "samsung,s5pv210-adc",
.data = &exynos_adc_s5pv210_data,
+ }, {
+ .compatible = "samsung,exynos4212-adc",
+ .data = &exynos4212_adc_data,
}, {
.compatible = "samsung,exynos-adc-v1",
.data = &exynos_adc_v1_data,
--
2.17.1
next prev parent reply other threads:[~2019-02-12 17:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-12 17:45 [PATCH 0/2] ARM/dts/iio: exynos-adc: Use proper number of channels for Exynos4x12 Krzysztof Kozlowski
2019-02-12 17:45 ` Krzysztof Kozlowski [this message]
2019-02-12 20:57 ` [PATCH 1/2] iio: adc: " Jonathan Cameron
2019-02-12 17:45 ` [PATCH 2/2] ARM: dts: exynos: Use ADC for Exynos4x12 on Exyno4412 Krzysztof Kozlowski
2019-03-18 18:38 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190212174550.4383-2-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=kgene@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).