From mboxrd@z Thu Jan 1 00:00:00 1970 From: Johan Hovold Subject: Re: [PATCH v3 2/4] dt-bindings: gnss: add mediatek binding Date: Wed, 13 Feb 2019 10:34:25 +0100 Message-ID: <20190213093425.GH28278@localhost> References: <1548693481-1162-1-git-send-email-lollivier@baylibre.com> <1548693481-1162-3-git-send-email-lollivier@baylibre.com> <20190130155016.GA26536@bogus> <20190211092251.GV4686@localhost> <86o97iv2px.fsf@baylibre.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <86o97iv2px.fsf@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org To: Loys Ollivier Cc: Johan Hovold , Rob Herring , devicetree@vger.kernel.org, Mark Rutland , linux-kernel@vger.kernel.org, Kevin Hilman , linux-amlogic@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Martin Blumenstingl List-Id: devicetree@vger.kernel.org On Mon, Feb 11, 2019 at 03:06:50PM +0100, Loys Ollivier wrote: > > On Mon 11 Feb 2019 at 09:22, Johan Hovold wrote: > > > On Wed, Jan 30, 2019 at 09:50:16AM -0600, Rob Herring wrote: > >> On Mon, Jan 28, 2019 at 05:37:59PM +0100, Loys Ollivier wrote: > >> > Add binding for Mediatek-based GNSS receivers. > >> > > >> > Signed-off-by: Loys Ollivier > >> reset-gpios is the standard name. > >> > >> > +- gtop,fix-gpios : GPIO used to determine device position fix state > >> > + (pin name: FIX, 3D_FIX) > > > > I'm thinking we might need a standard name for fix-gpios as well. This > > isn't a feature that is globaltop (or mediatek) specific, and other > > manufacturers provide similar functionality through pins named UI_FIX, > > or even LCKIND (lock indicator). > > > > The pin is typically used to drive an indicator LED AFAIU, but the > > characteristics of the signal varies from device to device (fw to fw), > > for example, pulse when no lock and low otherwise, or pulse when a 2d or > > 3d-fix is acquired, etc. > > > > Yes most GNSS recevivers provide a similar feature even if behavior of > the line differs. > > > I'm not sure how useful the pulsing would be for software, but someone > > might find a use for it in some form. > > > > Well it is useful to know when you start acquiring "valid" positionning > data. I'm using this as a trigger to start recording position. Sure, but a non-pulsing signal might have been easier to deal with if it was meant to be used by software. > > Rob, is this something we want to keep in the binding, and if so, how > > about using a generic name such as "gnss-fix-gpios"? > > Name "gnss-fix-gpios" sounds good to me. Let's go with that then. Johan