From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-eopbgr700060.outbound.protection.outlook.com ([40.107.70.60]:22944 "EHLO NAM04-SN1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727084AbfBOK1O (ORCPT ); Fri, 15 Feb 2019 05:27:14 -0500 From: Bogdan Togorean Subject: [PATCH] dt-bindings: adau1977: Fix reset-gpios typo Date: Fri, 15 Feb 2019 12:26:33 +0200 Message-ID: <20190215102633.12700-1-bogdan.togorean@analog.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain Sender: devicetree-owner@vger.kernel.org To: alsa-devel@alsa-project.org Cc: lars@metafoo.de, broonie@kernel.org, devicetree@vger.kernel.org, robh+dt@kernel.org, Bogdan Togorean List-ID: This change fixes a typo in the dt-binding examples (reset_gpio -> reset-gpios). Even though 'reset-gpio' is a valid construct for gpiolib the naming 'reset-gpios' is more suited for dt-bindings documentation. Signed-off-by: Bogdan Togorean --- Documentation/devicetree/bindings/sound/adi,adau1977.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.txt b/Documentation/devicetree/bindings/sound/adi,adau1977.txt index e79aeef73f28..11acd94b1665 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau1977.txt +++ b/Documentation/devicetree/bindings/sound/adi,adau1977.txt @@ -17,7 +17,7 @@ Required properties: Documentation/devicetree/bindings/regulator/regulator.txt Optional properties: - - reset-gpio: the reset pin for the chip, for more details consult + - reset-gpios: the reset pin for the chip, for more details consult Documentation/devicetree/bindings/gpio/gpio.txt - DVDD-supply: supply voltage for the digital core, please consult @@ -40,7 +40,7 @@ Examples: AVDD-supply = <®ulator>; DVDD-supply = <®ulator_digital>; - reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; adau1977_i2c: adau1977@11 { @@ -50,5 +50,5 @@ Examples: AVDD-supply = <®ulator>; DVDD-supply = <®ulator_digital>; - reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; -- 2.20.1