From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rob Herring <robh@kernel.org>
Subject: Re: [PATCH v2 09/15] dt-bindings: serial: Add Milbeaut serial driver
 description
Date: Mon, 18 Feb 2019 13:57:13 -0600
Message-ID: <20190218195713.GA18625@bogus>
References: <1549628849-31726-1-git-send-email-sugaya.taichi@socionext.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <1549628849-31726-1-git-send-email-sugaya.taichi@socionext.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Sugaya Taichi <sugaya.taichi@socionext.com>
Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Mark Rutland <mark.rutland@arm.com>, Takao Orito <orito.takao@socionext.com>, Kazuhiro Kasai <kasai.kazuhiro@socionext.com>, Shinji Kanematsu <kanematsu.shinji@socionext.com>, Jassi Brar <jaswinder.singh@linaro.org>, Masami Hiramatsu <masami.hiramatsu@linaro.org>
List-Id: devicetree@vger.kernel.org

On Fri, Feb 08, 2019 at 09:27:29PM +0900, Sugaya Taichi wrote:
> Add DT bindings document for Milbeaut serial driver.
> 
> Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
> ---
>  .../devicetree/bindings/serial/milbeaut-uart.txt    | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/serial/milbeaut-uart.txt
> 
> diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
> new file mode 100644
> index 0000000..8f61c38
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
> @@ -0,0 +1,21 @@
> +Socionext Milbeaut UART controller
> +
> +Required properties:
> +- compatible: should be "socionext,milbeaut-usio-uart".
> +- reg: offset and length of the register set for the device.
> +- interrupts: two interrupts specifier.
> +- clocks: phandle to the input clock.
> +- interrupt-names: should be "rx", "tx".

Put this next to 'interrupts'

> +
> +Optional properties:
> +- uart-flow-enable: flow control enable.

We already have a standard property for this: auto-flow-control

> +
> +Example:
> +	usio1: usio_uart@1e700010 {

serial@...

> +		compatible = "socionext,milbeaut-usio-uart";
> +		reg = <0x1e700010 0x10>;
> +		interrupts = <0 141 0x4>, <0 149 0x4>;
> +		interrupt-names = "rx", "tx";
> +		clocks = <&clk 2>;
> +		uart-flow-enable;
> +	};
> -- 
> 1.9.1
>