From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Belloni Subject: [PATCH 0/7] clk: at91: add sam9x60 pmc clock support Date: Wed, 20 Feb 2019 12:25:58 +0100 Message-ID: <20190220112605.23095-1-alexandre.belloni@bootlin.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Stephen Boyd Cc: Nicolas Ferre , Claudiu Beznea , Michael Turquette , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Alexandre Belloni List-Id: devicetree@vger.kernel.org This series add support for the sam9x60 clocks handled by the PMC. The first four patches are preparatory patches to handle register layout and offset differences. Then, a driver for the new interface for PLLs is added and the final patch is the driver for the sam9x60 PMC. Alexandre Belloni (7): clk: at91: allow configuring peripheral PCR layout clk: at91: allow configuring generated PCR layout clk: at91: usb: Add sam9x60 support clk: at91: master: Add sam9x60 support clk: at91: add sam9x60 PLL driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 pmc driver .../devicetree/bindings/clock/at91-clock.txt | 3 +- drivers/clk/at91/Makefile | 2 + drivers/clk/at91/at91sam9x5.c | 9 + drivers/clk/at91/clk-generated.c | 48 +-- drivers/clk/at91/clk-master.c | 8 +- drivers/clk/at91/clk-peripheral.c | 46 +-- drivers/clk/at91/clk-sam9x60-pll.c | 329 ++++++++++++++++++ drivers/clk/at91/clk-usb.c | 33 +- drivers/clk/at91/dt-compat.c | 12 +- drivers/clk/at91/pmc.h | 23 ++ drivers/clk/at91/sam9x60.c | 307 ++++++++++++++++ drivers/clk/at91/sama5d2.c | 10 + drivers/clk/at91/sama5d4.c | 8 + include/linux/clk/at91_pmc.h | 12 +- 14 files changed, 785 insertions(+), 65 deletions(-) create mode 100644 drivers/clk/at91/clk-sam9x60-pll.c create mode 100644 drivers/clk/at91/sam9x60.c -- 2.20.1