From: Shawn Guo <shawnguo@kernel.org>
To: Abel Vesa <abel.vesa@nxp.com>
Cc: Rob Herring <robh@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Sascha Hauer <kernel@pengutronix.de>,
Lucas Stach <l.stach@pengutronix.de>,
Angus Ainslie <angus.ainslie@puri.sm>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
Anson Huang <anson.huang@nxp.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
dl-linux-imx <linux-imx@nxp.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 2/3] arm64: dts: imx8mq: Add the buck vdd_arm regulator
Date: Thu, 28 Feb 2019 22:15:46 +0800 [thread overview]
Message-ID: <20190228141543.GA29231@dragon> (raw)
In-Reply-To: <1550254032-16451-3-git-send-email-abel.vesa@nxp.com>
On Fri, Feb 15, 2019 at 06:07:23PM +0000, Abel Vesa wrote:
> According to the schematics, this is a MP2147 switch converter
> which is controlled by GPIO1_IO13. When set the gpio is set to
> high the regulator output is set to 0.9V. When the gpio is set
> to low the regulator output is set to 1V.
>
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 36 ++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> index 54737bf..e5da3dd 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> @@ -31,6 +31,35 @@
> gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> enable-active-high;
> };
> +
> + buck2_reg: buck2 {
Please follow regulator-xxx naming convention.
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_buck2>;
> + compatible = "regulator-gpio";
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1000000>;
> + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> + states = <1000000 0x0
> + 900000 0x1>;
> + enable-active-high;
The property only makes sense when enable-gpio is present?
Shawn
> + };
> +};
> +
> +&A53_0 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&A53_1 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&A53_2 {
> + cpu-supply = <&buck2_reg>;
> +};
> +
> +&A53_3 {
> + cpu-supply = <&buck2_reg>;
> };
>
> &fec1 {
> @@ -203,6 +232,13 @@
> };
>
> &iomuxc {
> + pinctrl_buck2: vddarmgrp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19
> + >;
> +
> + };
> +
> pinctrl_fec1: fec1grp {
> fsl,pins = <
> MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
> --
> 2.7.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-02-28 14:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-15 18:07 [PATCH v2 0/3] arm: dts: imx8mq: Add cpufreq support Abel Vesa
2019-02-15 18:07 ` [PATCH v2 1/3] arm64: dts: imx8mq: Add the clocks and the latencies for the A53 cores Abel Vesa
2019-02-15 18:07 ` [PATCH v2 2/3] arm64: dts: imx8mq: Add the buck vdd_arm regulator Abel Vesa
2019-02-28 14:15 ` Shawn Guo [this message]
2019-02-28 14:29 ` Abel Vesa
2019-02-15 18:07 ` [PATCH v2 3/3] arm64: dts: imx8mq: Add the opp table and cores opp properties Abel Vesa
2019-02-28 14:20 ` Shawn Guo
2019-02-28 14:28 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190228141543.GA29231@dragon \
--to=shawnguo@kernel.org \
--cc=abel.vesa@nxp.com \
--cc=angus.ainslie@puri.sm \
--cc=anson.huang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).