From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sasha Levin Subject: [PATCH AUTOSEL 4.20 06/81] ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low Date: Thu, 28 Feb 2019 10:06:58 -0500 Message-ID: <20190228150813.10256-6-sashal@kernel.org> References: <20190228150813.10256-1-sashal@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190228150813.10256-1-sashal@kernel.org> Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: Martin Blumenstingl , Kevin Hilman , Sasha Levin , devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org List-Id: devicetree@vger.kernel.org From: Martin Blumenstingl [ Upstream commit c8bfe65fb1fb7a43d766df1dfa379406112cba61 ] After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") SD cards are not detected anymore. The CD GPIO is "active low" on the EC-100. The MMC dt-bindings specify: "[...] using the "cd-inverted" property means, that the CD line is active high, i.e. it is high, when a card is inserted". Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and drop the "cd-inverted" property. This makes the definition consistent with the existing dt-bindings and fixes the check whether an SD card is inserted. Fixes: bbedc1f1d90e33 ("ARM: dts: meson8b: Add support for the Endless Mini (EC-100)") Signed-off-by: Martin Blumenstingl Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman Signed-off-by: Sasha Levin --- arch/arm/boot/dts/meson8b-ec100.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 0872f6e3abf56..d50fc2f60fa31 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -205,8 +205,7 @@ cap-sd-highspeed; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; }; -- 2.19.1