* [PATCH v2 0/4] add MaxBotix I2CXL ultrasonic iio driver
@ 2019-03-01 13:41 Andreas Klinger
0 siblings, 0 replies; only message in thread
From: Andreas Klinger @ 2019-03-01 13:41 UTC (permalink / raw)
To: devicetree, linux-iio
Cc: jic23, robh+dt, mark.rutland, afaerber, arnd, davem, gregkh,
johan, khilman, knaack.h, lars, linux-kernel, martin.blumenstingl,
mchehab+samsung, m.othacehe, nicolas.ferre, pmeerw, robh,
songqiang1304521, treding, techsupport
This patch series adds support for I2CXL-MaxSonar ultrasonic distance
sensors of family mb12x2 using the i2c interface of vendor MaxBotix
Implemented and tested functionality:
- reading the distance via in_distance_raw
- buffered mode with trigger
- make use of status gpio to announce completion of ranging
Changes in v2:
Thanks to the review of Andreas and Peter there are a couple of changes:
- rename type wildcard mb12x2 to i2cxl in dt binding
- split changes in vendor list and dt doc into two patches
- merge driver source and Kconfig/Makefile change into one patch
- reword dt documentation
- use directly __be16 datatype to read directly from i2c
- use s16 as return value from mb12x2_read_distance()
Andreas Klinger (4):
dt-bindings: Add vendor prefix for MaxBotix
dt-bindings: maxbotix,i2cxl: Add MaxBotix i2c ultrasonic rangers
mb12x2.c: add distance iio sensor with i2c
MAINTAINERS: add maintainer for maxbotix ultrasonic driver
.../bindings/iio/proximity/maxbotix,i2cxl.txt | 21 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 7 +
drivers/iio/proximity/Kconfig | 11 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/mb12x2.c | 283 +++++++++++++++++++++
6 files changed, 324 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/proximity/maxbotix,i2cxl.txt
create mode 100644 drivers/iio/proximity/mb12x2.c
--
2.11.0
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2019-03-01 13:41 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-03-01 13:41 [PATCH v2 0/4] add MaxBotix I2CXL ultrasonic iio driver Andreas Klinger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).