From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Sat, 2 Mar 2019 22:07:33 +0100 From: Alexandre Belloni Subject: Re: [PATCH 0/5] Add EPSON RX-8571 RTC support Message-ID: <20190302210733.GC3452@piout.net> References: <1550742048-28068-1-git-send-email-biju.das@bp.renesas.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1550742048-28068-1-git-send-email-biju.das@bp.renesas.com> To: Biju Das Cc: Alessandro Zummo , Rob Herring , Mark Rutland , linux-rtc@vger.kernel.org, devicetree@vger.kernel.org, Simon Horman , Geert Uytterhoeven , Chris Paterson , Fabrizio Castro , linux-renesas-soc@vger.kernel.org List-ID: On 21/02/2019 09:40:43+0000, Biju Das wrote: > This patch set aims to add support for EPSON RX-8571 real-time clock. > EPSON RX-8571 rtc is compatible with EPSON RX-8581 rtc except that > former has 16 bytes additional RAM. > > 1 byte of nvmem is supported on both RX-8581 and RX-8571. It is > exposed through sysfs along with support for 16 bytes additional RAM > present only on EPSON RX-8571. > > This patch series is tested against renesas-dev and linux-next. > > Biju Das (5): > rtc: rx8581: Add rx8571 compatible > rtc: rx8581: Add support for rx8571 RTC > rtc: rx8581: Add support for Epson rx8571 RTC Applied 1-3. Note that I squashed 2 and 3 as 2 didn't make much sense without 3. -- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com