From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel Raynal Subject: Re: [PATCH v4 6/9] mtd: rawnand: ingenic: Separate top-level and SoC specific code Date: Mon, 4 Mar 2019 11:20:58 +0100 Message-ID: <20190304112058.67cd5194@xps13> References: <20190209192305.4434-1-paul@crapouillou.net> <20190209192305.4434-6-paul@crapouillou.net> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: <20190209192305.4434-6-paul@crapouillou.net> Sender: linux-kernel-owner@vger.kernel.org To: Paul Cercueil Cc: David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Rob Herring , Mark Rutland , Harvey Hunt , linux-mtd@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Hi Paul, Paul Cercueil wrote on Sat, 9 Feb 2019 16:23:02 -0300: > The ingenic-nand driver uses an API provided by the jz4780-bch driver. > This makes it difficult to support other SoCs in the jz4780-bch driver. > To work around this, we separate the API functions from the SoC-specific > code, so that these API functions are SoC-agnostic. > I like the idea, actually I am working on this separation (see [1]) and I would really appreciate that you try to implement the interface when it will be available (v2 is coming this week, I think v3 will be the one to test when raw NAND devices will be properly supported). I will add you in Cc: if you want to follow/review. [1] http://lists.infradead.org/pipermail/linux-mtd/2019-February/087815.html > Signed-off-by: Paul Cercueil > --- > > v2: Add an optional .probe() callback. It is used for instance to set > the clock rate in the JZ4780 backend. > > v3: The common code is now inside the ingenic-ecc module. Each > SoC-specific ECC code is now in its own module, which leaves to the > user the choice of which (if any) ECC code should be supported. > > v4: No change > > drivers/mtd/nand/raw/ingenic/Kconfig | 17 +++ > drivers/mtd/nand/raw/ingenic/Makefile | 5 +- > drivers/mtd/nand/raw/ingenic/ingenic_ecc.c | 157 +++++++++++++++++++++++++ > drivers/mtd/nand/raw/ingenic/ingenic_ecc.h | 84 ++++++++++++++ > drivers/mtd/nand/raw/ingenic/ingenic_nand.c | 38 +++---- > drivers/mtd/nand/raw/ingenic/jz4780_bch.c | 170 +++++----------------------- > drivers/mtd/nand/raw/ingenic/jz4780_bch.h | 40 ------- > 7 files changed, 308 insertions(+), 203 deletions(-) > create mode 100644 drivers/mtd/nand/raw/ingenic/ingenic_ecc.c > create mode 100644 drivers/mtd/nand/raw/ingenic/ingenic_ecc.h > delete mode 100644 drivers/mtd/nand/raw/ingenic/jz4780_bch.h > [...] > diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c > index 8c73f7c5be9a..0f51fd15fe79 100644 > --- a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c > +++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c > @@ -22,7 +22,7 @@ > > #include > > -#include "jz4780_bch.h" > +#include "ingenic_ecc.h" > > #define DRV_NAME "ingenic-nand" > > @@ -40,7 +40,7 @@ struct ingenic_nand_cs { > > struct ingenic_nfc { > struct device *dev; > - struct jz4780_bch *bch; > + struct ingenic_ecc *ecc; > struct nand_controller controller; > unsigned int num_banks; > struct list_head chips; > @@ -124,10 +124,10 @@ static int ingenic_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat, > { > struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip)); > struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller); > - struct jz4780_bch_params params; > + struct ingenic_ecc_params params; > > /* > - * Don't need to generate the ECC when reading, BCH does it for us as > + * Don't need to generate the ECC when reading, ECC does it for us as "the ECC engine does it for us" would be more meaningful. > * part of decoding/correction. > */ > if (nand->reading) > @@ -137,7 +137,7 @@ static int ingenic_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat, > params.bytes = nand->chip.ecc.bytes; > params.strength = nand->chip.ecc.strength; > > - return jz4780_bch_calculate(nfc->bch, ¶ms, dat, ecc_code); > + return ingenic_ecc_calculate(nfc->ecc, ¶ms, dat, ecc_code); > } > Thanks, Miquèl