From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel Raynal Subject: Re: [PATCH v4 2/9] dt-bindings: mtd: ingenic: Change 'BCH' to 'ECC' in documentation Date: Mon, 4 Mar 2019 19:58:52 +0100 Message-ID: <20190304195852.45c056f6@xps13> References: <20190209192305.4434-1-paul@crapouillou.net> <20190209192305.4434-2-paul@crapouillou.net> <20190304105014.0cceea0a@xps13> <1551723830.4932.3@crapouillou.net> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: <1551723830.4932.3@crapouillou.net> Sender: linux-kernel-owner@vger.kernel.org To: Paul Cercueil Cc: David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Rob Herring , Mark Rutland , Harvey Hunt , linux-mtd@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Hi Paul, Paul Cercueil wrote on Mon, 04 Mar 2019 19:23:50 +0100: > On Mon, Mar 4, 2019 at 10:50 AM, Miquel Raynal wrote: > > Hi Paul, > > > > Paul Cercueil > > wrote on Sat, 9 Feb 2019 16:22:58 > > -0300: > > > >> The JZ4740 ECC hardware is not BCH but Reed-Solomon, so it makes >> more > >> sense to use the more generic ECC term. > >> >> Signed-off-by: Paul Cercueil > > > >> --- > >> >> Changes: > >> >> v3: New patch > >> >> v4: No change > >> >> .../devicetree/bindings/mtd/ingenic,jz4780-nand.txt | 18 >> +++++++++--------- > >> 1 file changed, 9 insertions(+), 9 deletions(-) > >> >> diff --git >> a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt >> b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt > >> index a5b940f18bf6..5a45cc54f46d 100644 > >> --- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt > >> +++ b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt > >> @@ -1,4 +1,4 @@ > >> -* Ingenic JZ4780 NAND/BCH > >> +* Ingenic JZ4780 NAND/ECC > >> >> This file documents the device tree bindings for NAND flash >> devices on the > >> JZ4780. NAND devices are connected to the NEMC controller >> (described in > >> @@ -14,10 +14,10 @@ Required NAND controller device properties: > >> an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC >> bank). > >> >> Optional NAND controller device properties: > >> -- ingenic,bch-controller: To make use of the hardware BCH >> controller, this > >> - property must contain a phandle for the BCH controller node. The >> required > >> +- ingenic,bch-controller: To make use of the hardware ECC >> controller, this > >> + property must contain a phandle for the ECC controller node. The >> required > > > > I think there is already a 'ecc-engine' property used by MTK and Atmel > > NAND controllers to point to the ECC engine block. Please use this > > property instead of the ingenic specific one. > > ingenic,bch-controller is already in the devicetree ABI. I can't change it now... Oh, right... Well, same thing as before, maybe you can change it and keep the driver backward compatible? I don't want new DT to use this property because it is not generic and we must have a way from the core to find the ECC engine handle when the controller does not embed one itself (thus, the ecc-engine property which is around for quite some time already). Thanks, Miquèl