* [PATCH 0/2] add support for LSM6DSOX
@ 2019-03-15 10:08 Lorenzo Bianconi
2019-03-15 10:08 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOX Lorenzo Bianconi
2019-03-15 10:08 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings Lorenzo Bianconi
0 siblings, 2 replies; 5+ messages in thread
From: Lorenzo Bianconi @ 2019-03-15 10:08 UTC (permalink / raw)
To: jic23; +Cc: linux-iio, devicetree, lorenzo.bianconi
Add support for LSM6DSOX IMU mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsox.pdf
Please note I just compiled the series since I have no adapter for this sensor
but according to the datasheet it has a common register map with lsm6dso (at
least for supported features)
Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: add support to LSM6DSOX
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings
Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 +
drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 4 ++--
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 3 ++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++
7 files changed, 18 insertions(+), 4 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOX
2019-03-15 10:08 [PATCH 0/2] add support for LSM6DSOX Lorenzo Bianconi
@ 2019-03-15 10:08 ` Lorenzo Bianconi
2019-03-16 16:45 ` Jonathan Cameron
2019-03-15 10:08 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings Lorenzo Bianconi
1 sibling, 1 reply; 5+ messages in thread
From: Lorenzo Bianconi @ 2019-03-15 10:08 UTC (permalink / raw)
To: jic23; +Cc: linux-iio, devicetree, lorenzo.bianconi
Add support to STM LSM6DSOX 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/lsm6dsox.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 4 ++--
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 3 ++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++
6 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 36048bf0455a..8dcf5137b8da 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -9,7 +9,7 @@ config IIO_ST_LSM6DSX
help
Say yes here to build support for STMicroelectronics LSM6DSx imu
sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
- ism330dlc, lsm6dso, asm330lhh
+ ism330dlc, lsm6dso, lsm6dsox, asm330lhh
To compile this driver as a module, choose M here: the module
will be called st_lsm6dsx.
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index de2a0dc39353..0a0c56c1701d 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -21,6 +21,7 @@
#define ST_ISM330DLC_DEV_NAME "ism330dlc"
#define ST_LSM6DSO_DEV_NAME "lsm6dso"
#define ST_ASM330LHH_DEV_NAME "asm330lhh"
+#define ST_LSM6DSOX_DEV_NAME "lsm6dsox"
enum st_lsm6dsx_hw_id {
ST_LSM6DS3_ID,
@@ -30,6 +31,7 @@ enum st_lsm6dsx_hw_id {
ST_ISM330DLC_ID,
ST_LSM6DSO_ID,
ST_ASM330LHH_ID,
+ ST_LSM6DSOX_ID,
ST_LSM6DSX_MAX_ID,
};
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index 8f443bdb5b51..2da8c5ff699a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -13,7 +13,7 @@
* (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
* value of the decimation factor and ODR set for each FIFO data set.
*
- * LSM6DSO/ASM330LHH: The FIFO buffer can be configured to store data
+ * LSM6DSO/LSM6DSOX/ASM330LHH: The FIFO buffer can be configured to store data
* from gyroscope and accelerometer. Each sample is queued with a tag (1B)
* indicating data source (gyroscope, accelerometer, hw timer).
*
@@ -506,7 +506,7 @@ st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
}
/**
- * st_lsm6dsx_read_tagged_fifo() - LSM6DSO/ASM330LHH read FIFO routine
+ * st_lsm6dsx_read_tagged_fifo() - LSM6DSO/LSM6DSOX/ASM330LHH read FIFO routine
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
*
* Read samples from the hw FIFO and push them to IIO buffers.
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 50cab3531b11..c167ae2c21ab 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -23,7 +23,7 @@
* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
* - FIFO size: 4KB
*
- * - LSM6DSO/ASM330LHH
+ * - LSM6DSO/LSM6DSOX/ASM330LHH
* - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416
* - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
@@ -287,6 +287,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.max_fifo_size = 512,
.id = {
[0] = ST_LSM6DSO_ID,
+ [1] = ST_LSM6DSOX_ID,
},
.batch = {
[ST_LSM6DSX_ID_ACC] = {
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index 00b4b702645a..0bfc66d2d772 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -69,6 +69,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
.compatible = "st,asm330lhh",
.data = (void *)ST_ASM330LHH_ID,
},
+ {
+ .compatible = "st,lsm6dsox",
+ .data = (void *)ST_LSM6DSOX_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -81,6 +85,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
{ ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
{ ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
{ ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
+ { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID },
{},
};
MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index 836256c2ac7d..9f46d4ce9fc1 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -69,6 +69,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
.compatible = "st,asm330lhh",
.data = (void *)ST_ASM330LHH_ID,
},
+ {
+ .compatible = "st,lsm6dsox",
+ .data = (void *)ST_LSM6DSOX_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -81,6 +85,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
{ ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
{ ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
{ ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
+ { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID },
{},
};
MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings
2019-03-15 10:08 [PATCH 0/2] add support for LSM6DSOX Lorenzo Bianconi
2019-03-15 10:08 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOX Lorenzo Bianconi
@ 2019-03-15 10:08 ` Lorenzo Bianconi
2019-03-16 16:54 ` Jonathan Cameron
1 sibling, 1 reply; 5+ messages in thread
From: Lorenzo Bianconi @ 2019-03-15 10:08 UTC (permalink / raw)
To: jic23; +Cc: linux-iio, devicetree, lorenzo.bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
index 8f1b09e39c72..4640a012c17a 100644
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -9,6 +9,7 @@ Required properties:
"st,ism330dlc"
"st,lsm6dso"
"st,asm330lhh"
+ "st,lsm6dsox"
- reg: i2c address of the sensor / spi cs line
Optional properties:
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOX
2019-03-15 10:08 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOX Lorenzo Bianconi
@ 2019-03-16 16:45 ` Jonathan Cameron
0 siblings, 0 replies; 5+ messages in thread
From: Jonathan Cameron @ 2019-03-16 16:45 UTC (permalink / raw)
To: Lorenzo Bianconi; +Cc: linux-iio, devicetree, lorenzo.bianconi
On Fri, 15 Mar 2019 11:08:24 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> Add support to STM LSM6DSOX 6-axis (acc + gyro) Mems sensor
> https://www.st.com/resource/en/datasheet/lsm6dsox.pdf
>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied to the togreg branch of iio.git and pushed out as
testing for the autobuilders to play with it.
thanks,
Jonathan
> ---
> drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 4 ++--
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 3 ++-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++
> 6 files changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
> index 36048bf0455a..8dcf5137b8da 100644
> --- a/drivers/iio/imu/st_lsm6dsx/Kconfig
> +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
> @@ -9,7 +9,7 @@ config IIO_ST_LSM6DSX
> help
> Say yes here to build support for STMicroelectronics LSM6DSx imu
> sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
> - ism330dlc, lsm6dso, asm330lhh
> + ism330dlc, lsm6dso, lsm6dsox, asm330lhh
>
> To compile this driver as a module, choose M here: the module
> will be called st_lsm6dsx.
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index de2a0dc39353..0a0c56c1701d 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -21,6 +21,7 @@
> #define ST_ISM330DLC_DEV_NAME "ism330dlc"
> #define ST_LSM6DSO_DEV_NAME "lsm6dso"
> #define ST_ASM330LHH_DEV_NAME "asm330lhh"
> +#define ST_LSM6DSOX_DEV_NAME "lsm6dsox"
>
> enum st_lsm6dsx_hw_id {
> ST_LSM6DS3_ID,
> @@ -30,6 +31,7 @@ enum st_lsm6dsx_hw_id {
> ST_ISM330DLC_ID,
> ST_LSM6DSO_ID,
> ST_ASM330LHH_ID,
> + ST_LSM6DSOX_ID,
> ST_LSM6DSX_MAX_ID,
> };
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> index 8f443bdb5b51..2da8c5ff699a 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> @@ -13,7 +13,7 @@
> * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
> * value of the decimation factor and ODR set for each FIFO data set.
> *
> - * LSM6DSO/ASM330LHH: The FIFO buffer can be configured to store data
> + * LSM6DSO/LSM6DSOX/ASM330LHH: The FIFO buffer can be configured to store data
> * from gyroscope and accelerometer. Each sample is queued with a tag (1B)
> * indicating data source (gyroscope, accelerometer, hw timer).
> *
> @@ -506,7 +506,7 @@ st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
> }
>
> /**
> - * st_lsm6dsx_read_tagged_fifo() - LSM6DSO/ASM330LHH read FIFO routine
> + * st_lsm6dsx_read_tagged_fifo() - LSM6DSO/LSM6DSOX/ASM330LHH read FIFO routine
> * @hw: Pointer to instance of struct st_lsm6dsx_hw.
> *
> * Read samples from the hw FIFO and push them to IIO buffers.
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 50cab3531b11..c167ae2c21ab 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -23,7 +23,7 @@
> * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
> * - FIFO size: 4KB
> *
> - * - LSM6DSO/ASM330LHH
> + * - LSM6DSO/LSM6DSOX/ASM330LHH
> * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416
> * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
> * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
> @@ -287,6 +287,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .max_fifo_size = 512,
> .id = {
> [0] = ST_LSM6DSO_ID,
> + [1] = ST_LSM6DSOX_ID,
> },
> .batch = {
> [ST_LSM6DSX_ID_ACC] = {
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> index 00b4b702645a..0bfc66d2d772 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> @@ -69,6 +69,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
> .compatible = "st,asm330lhh",
> .data = (void *)ST_ASM330LHH_ID,
> },
> + {
> + .compatible = "st,lsm6dsox",
> + .data = (void *)ST_LSM6DSOX_ID,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
> @@ -81,6 +85,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
> { ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
> { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
> { ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
> + { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID },
> {},
> };
> MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
> index 836256c2ac7d..9f46d4ce9fc1 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
> @@ -69,6 +69,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
> .compatible = "st,asm330lhh",
> .data = (void *)ST_ASM330LHH_ID,
> },
> + {
> + .compatible = "st,lsm6dsox",
> + .data = (void *)ST_LSM6DSOX_ID,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
> @@ -81,6 +85,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
> { ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
> { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
> { ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
> + { ST_LSM6DSOX_DEV_NAME, ST_LSM6DSOX_ID },
> {},
> };
> MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings
2019-03-15 10:08 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings Lorenzo Bianconi
@ 2019-03-16 16:54 ` Jonathan Cameron
0 siblings, 0 replies; 5+ messages in thread
From: Jonathan Cameron @ 2019-03-16 16:54 UTC (permalink / raw)
To: Lorenzo Bianconi; +Cc: linux-iio, devicetree, lorenzo.bianconi
On Fri, 15 Mar 2019 11:08:25 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied,
Thanks,
Jonathan
> ---
> Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> index 8f1b09e39c72..4640a012c17a 100644
> --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> @@ -9,6 +9,7 @@ Required properties:
> "st,ism330dlc"
> "st,lsm6dso"
> "st,asm330lhh"
> + "st,lsm6dsox"
> - reg: i2c address of the sensor / spi cs line
>
> Optional properties:
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-03-16 16:54 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-03-15 10:08 [PATCH 0/2] add support for LSM6DSOX Lorenzo Bianconi
2019-03-15 10:08 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOX Lorenzo Bianconi
2019-03-16 16:45 ` Jonathan Cameron
2019-03-15 10:08 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings Lorenzo Bianconi
2019-03-16 16:54 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).