Re: [PATCH 1/2] dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 15 Mar 2019 16:11:50 +0100
Gregory CLEMENT <gregory.clement@bootlin.com> wrote:

> This adds device tree bindings for the TI ADS8344 A/DC chips.
> 
> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Looks good to me, though io-channel-cells only needs to be 1 if
you have consumers...  Otherwise, it shouldn't be there at all..

Jonathan

> ---
>  .../bindings/iio/adc/ti-ads8344.txt           | 21 +++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
> new file mode 100644
> index 000000000000..6576c4fed7b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
> @@ -0,0 +1,21 @@
> +* Texas Instruments ADS8344 A/DC chip
> +
> +Required properties:
> + - compatible: Must be "ti,ads8344"
> + - #io-channel-cells: Must be 1 as per ../iio-bindings.txt
> + - reg: SPI chip select number for the device
> + - vref-supply: phandle to a regulator node that supplies the
> +   reference voltage
> +
> +Recommended properties:
> + - spi-max-frequency: Definition as per
> +		Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +Example:
> +adc@0 {
> +	compatible = "ti,ads8344";
> +	reg = <0>;
> +	#io-channel-cells = <1>;
> +	vref-supply = <&refin_supply>;
> +	spi-max-frequency = <10000000>;
> +};