From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCH 1/2] dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips Date: Sat, 16 Mar 2019 17:07:30 +0000 Message-ID: <20190316170730.2ed341cc@archlinux> References: <20190315151152.30467-1-gregory.clement@bootlin.com> <20190315151152.30467-2-gregory.clement@bootlin.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190315151152.30467-2-gregory.clement@bootlin.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Gregory CLEMENT Cc: devicetree@vger.kernel.org, Alexandre Belloni , Lars-Peter Clausen , Thomas Petazzoni , linux-iio@vger.kernel.org, Rob Herring , Peter Meerwald-Stadler , Hartmut Knaack , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On Fri, 15 Mar 2019 16:11:50 +0100 Gregory CLEMENT wrote: > This adds device tree bindings for the TI ADS8344 A/DC chips. > > Signed-off-by: Gregory CLEMENT Looks good to me, though io-channel-cells only needs to be 1 if you have consumers... Otherwise, it shouldn't be there at all.. Jonathan > --- > .../bindings/iio/adc/ti-ads8344.txt | 21 +++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt > > diff --git a/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt > new file mode 100644 > index 000000000000..6576c4fed7b7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt > @@ -0,0 +1,21 @@ > +* Texas Instruments ADS8344 A/DC chip > + > +Required properties: > + - compatible: Must be "ti,ads8344" > + - #io-channel-cells: Must be 1 as per ../iio-bindings.txt > + - reg: SPI chip select number for the device > + - vref-supply: phandle to a regulator node that supplies the > + reference voltage > + > +Recommended properties: > + - spi-max-frequency: Definition as per > + Documentation/devicetree/bindings/spi/spi-bus.txt > + > +Example: > +adc@0 { > + compatible = "ti,ads8344"; > + reg = <0>; > + #io-channel-cells = <1>; > + vref-supply = <&refin_supply>; > + spi-max-frequency = <10000000>; > +};