From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: [PATCH v3 9/9] ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards Date: Thu, 21 Mar 2019 16:48:50 +0800 Message-ID: <20190321084850.20769-10-wens@kernel.org> References: <20190321084850.20769-1-wens@kernel.org> Reply-To: wens-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org In-Reply-To: <20190321084850.20769-1-wens-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Maxime Ripard , Lee Jones , Sebastian Reichel Cc: Chen-Yu Tsai , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Hans de Goede List-Id: devicetree@vger.kernel.org From: Chen-Yu Tsai The Bananapi M3 and Cubietruck Plus both have USB OTG ports wired to the SoC and PMIC in the same way, with the N_VBUSEN pin on the PMIC controlling VBUS output, the PMIC's VBUS input for sensing VBUS, and PH11 on the SoC for sensing the ID pin. Enable OTG on both boards. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 12 ++++++++++++ arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 12 ++++++++++++ 2 files changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 838be7b3715f..9d34eabba121 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -389,7 +389,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index fcbec3d7ccd7..ea299d3d84d0 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -420,7 +420,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- 2.20.1