From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gregory CLEMENT Subject: [PATCH v2 0/2] Add support for the TI ADS8344 A/DC chips Date: Fri, 22 Mar 2019 12:11:06 +0100 Message-ID: <20190322111108.19383-1-gregory.clement@bootlin.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Jonathan Cameron , Hartmut Knaack , Lars-Peter Clausen , Peter Meerwald-Stadler , linux-iio@vger.kernel.org Cc: devicetree@vger.kernel.org, Alexandre Belloni , Gregory CLEMENT , Rob Herring , Thomas Petazzoni , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Hello, this is the second version of a small series adding the support for the Texas Instruments ADS8344 ADC chip. This chip has a 16-bit 8-Channel ADC and is access directly through SPI. The first patch add the binding documentation and the second one, the driver itself. Changelog: v1->v2: - Remove the mention to the #io-channel-cells in the first patch, as there is no consumer. - Remove scan_index and scan_type, they are not used. - Use defines for building the command and remove the comment. - Remove the goto and the label in the probe() function as the label was only use once. - Remove the "#ifdef CONFIG_OF", the driver already depends on OF. - Don't use of_match_ptr and rename ads8344_dt_id to ads8344_of_match. Gregory Gregory CLEMENT (2): dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips iio: adc: Add driver for the TI ADS8344 A/DC chips .../bindings/iio/adc/ti-ads8344.txt | 19 ++ drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ti-ads8344.c | 200 ++++++++++++++++++ 4 files changed, 230 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt create mode 100644 drivers/iio/adc/ti-ads8344.c -- 2.20.1