From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jonathan Cameron <jic23@kernel.org>
Subject: Re: [PATCH 2/2] dt-bindings: iio: add Bosch BMG160 gyroscope sensor
Date: Sun, 24 Mar 2019 18:06:54 +0000
Message-ID: <20190324180654.44289894@archlinux>
References: <cover.1552922054.git.hns@goldelico.com>
        <1664da2e7a9cb687eece1f27501d275219bcc4ed.1552922054.git.hns@goldelico.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <1664da2e7a9cb687eece1f27501d275219bcc4ed.1552922054.git.hns@goldelico.com>
Sender: linux-kernel-owner@vger.kernel.org
To: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Hartmut Knaack <knaack.h@gmx.de>, Lars-Peter Clausen <lars@metafoo.de>, Peter Meerwald-Stadler <pmeerw@pmeerw.net>, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, letux-kernel@openphoenux.org, kernel@pyra-handheld.com
List-Id: devicetree@vger.kernel.org

On Mon, 18 Mar 2019 16:14:15 +0100
"H. Nikolaus Schaller" <hns@goldelico.com> wrote:

> Define bindings for "bosch,bmg160" and "bosch,bmi055_gyro".
> 
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Simple binding so applied to the togreg branch of iio.git and pushed out as
testing. Still time for a devicetree ack (or to pull it ;) if anyone has
time to look.

Thanks,

Jonathan

> ---
>  .../bindings/iio/gyroscope/bmg160.txt         | 20 +++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
> new file mode 100644
> index 000000000000..78e18a1e9c1d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt
> @@ -0,0 +1,20 @@
> +* Bosch BMG160 triaxial rotation sensor (gyroscope)
> +
> +Required properties:
> +
> +  - compatible : should be "bosch,bmg160" or "bosch,bmi055_gyro"
> +  - reg : the I2C address of the sensor (0x69)
> +
> +Optional properties:
> +
> +  - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
> +		flags IRQ_TYPE_EDGE_RISING
> +
> +Example:
> +
> +bmg160@69 {
> +	compatible = "bosch,bmg160";
> +	reg = <0x69>;
> +	interrupt-parent = <&gpio6>;
> +	interrupts = <18 (IRQ_TYPE_EDGE_RISING)>;
> +};