From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Klinger Subject: [PATCH 2/2] devantech-srf04.txt: remove old DT documentation Date: Tue, 26 Mar 2019 13:31:47 +0100 Message-ID: <20190326123146.2ru6yu5vea2xha4r@arbad> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org To: jic23@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com Cc: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org remove the outdated DT documentation of devantech srf04 iio driver which is replaced by devantech-srf04.yaml Signed-off-by: Andreas Klinger --- .../bindings/iio/proximity/devantech-srf04.txt | 28 ---------------------- 1 file changed, 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt deleted file mode 100644 index d4dc7a227e2e..000000000000 --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Devantech SRF04 ultrasonic range finder - Bit-banging driver using two GPIOs - -Required properties: - - compatible: Should be "devantech,srf04" - - - trig-gpios: Definition of the GPIO for the triggering (output) - This GPIO is set for about 10 us by the driver to tell the - device it should initiate the measurement cycle. - - - echo-gpios: Definition of the GPIO for the echo (input) - This GPIO is set by the device as soon as an ultrasonic - burst is sent out and reset when the first echo is - received. - Thus this GPIO is set while the ultrasonic waves are doing - one round trip. - It needs to be an GPIO which is able to deliver an - interrupt because the time between two interrupts is - measured in the driver. - See Documentation/devicetree/bindings/gpio/gpio.txt for - information on how to specify a consumer gpio. - -Example: -srf04@0 { - compatible = "devantech,srf04"; - trig-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - echo-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; -}; -- 2.11.0