From mboxrd@z Thu Jan 1 00:00:00 1970 From: megous via linux-sunxi Subject: [PATCH 1/7] ARM: dts: sun8i: tbs-a711: Enable bluetooth Date: Wed, 27 Mar 2019 01:18:37 +0100 Message-ID: <20190327001843.2420-2-megous@megous.com> References: <20190327001843.2420-1-megous@megous.com> Reply-To: megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Return-path: In-Reply-To: <20190327001843.2420-1-megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, wens-jdAy2FN1RRM@public.gmane.org, robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, johan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org Cc: Ondrej Jirman , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org From: Ondrej Jirman TBS A711 tablet has a bcm20702a1 bluetooth chip (part of AP6210 WiFi/BT module) connected to UART1. Add node for the blutooth chip. The driver needs brcm/BCM20702A1.hcd firmware file to run. Signed-off-by: Ondrej Jirman --- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 1e840ab5a541..6aae70c89a1e 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -406,7 +406,20 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm20702a1"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vbat>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + max-speed = <1500000>; + }; }; &usb_otg { -- 2.21.0