From: Matthias Kaehlcke <mka@chromium.org>
To: Harish Bandi <c-hbandi@codeaurora.org>
Cc: marcel@holtmann.org, johan.hedberg@gmail.com,
linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
hemantg@codeaurora.org, linux-arm-msm@vger.kernel.org,
bgodavar@codeaurora.org, anubhavg@codeaurora.org,
devicetree@vger.kernel.org, mark.rutland@arm.com,
robh+dt@kernel.org
Subject: Re: [PATCH v6 1/2] Bluetooth: hci_qca: Added support for WCN3998
Date: Wed, 27 Mar 2019 09:56:15 -0700 [thread overview]
Message-ID: <20190327165615.GC112750@google.com> (raw)
In-Reply-To: <1553689723-21017-2-git-send-email-c-hbandi@codeaurora.org>
On Wed, Mar 27, 2019 at 05:58:42PM +0530, Harish Bandi wrote:
> Added new compatible for WCN3998 and corresponding voltage
> and current values to WCN3998 compatible.
> Changed driver code to support WCN3998
>
> Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org>
You forgot to add 'Reviewed-by' my tag from v5. No need to resend,
I'll add it again below, but it's the general practice to include tags
like 'Reviewed-by' or 'Acked-by' when sending a new revision.
> ---
> Changes in V6:
> - changed return value to false in the qca_is_wcn399x()stub
> ---
> drivers/bluetooth/btqca.c | 13 +++++++++++--
> drivers/bluetooth/btqca.h | 8 +++++++-
> drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++--------------
> 3 files changed, 44 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index 6122685..383e99f 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -344,7 +344,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>
> /* Download rampatch file */
> config.type = TLV_TYPE_PATCH;
> - if (soc_type == QCA_WCN3990) {
> + if (qca_is_wcn399x(soc_type)) {
> /* Firmware files to download are based on ROM version.
> * ROM version is derived from last two bytes of soc_ver.
> */
> @@ -365,7 +365,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>
> /* Download NVM configuration */
> config.type = TLV_TYPE_NVM;
> - if (soc_type == QCA_WCN3990)
> + if (qca_is_wcn399x(soc_type))
> snprintf(config.fwname, sizeof(config.fwname),
> "qca/crnv%02x.bin", rom_ver);
> else
> @@ -410,6 +410,15 @@ int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> }
> EXPORT_SYMBOL_GPL(qca_set_bdaddr);
>
> +bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
> +{
> + if ((soc_type == QCA_WCN3990) || (soc_type == QCA_WCN3998))
> + return true;
> +
> + return false;
> +}
> +EXPORT_SYMBOL_GPL(qca_is_wcn399x);
> +
> MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
> MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
> MODULE_VERSION(VERSION);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 6fdc25d..0f68c9e7 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -132,7 +132,8 @@ enum qca_btsoc_type {
> QCA_INVALID = -1,
> QCA_AR3002,
> QCA_ROME,
> - QCA_WCN3990
> + QCA_WCN3990,
> + QCA_WCN3998,
> };
>
> #if IS_ENABLED(CONFIG_BT_QCA)
> @@ -142,6 +143,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> enum qca_btsoc_type soc_type, u32 soc_ver);
> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
> int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> +bool qca_is_wcn399x(enum qca_btsoc_type soc_type);
> #else
>
> static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> @@ -165,4 +167,8 @@ static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> return -EOPNOTSUPP;
> }
>
> +static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
> +{
> + return false;
> +}
> #endif
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 4ea995d..4af580a 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -521,7 +521,7 @@ static int qca_open(struct hci_uart *hu)
> if (hu->serdev) {
>
> qcadev = serdev_device_get_drvdata(hu->serdev);
> - if (qcadev->btsoc_type != QCA_WCN3990) {
> + if (!qca_is_wcn399x(qcadev->btsoc_type)) {
> gpiod_set_value_cansleep(qcadev->bt_en, 1);
> } else {
> hu->init_speed = qcadev->init_speed;
> @@ -627,7 +627,7 @@ static int qca_close(struct hci_uart *hu)
>
> if (hu->serdev) {
> qcadev = serdev_device_get_drvdata(hu->serdev);
> - if (qcadev->btsoc_type == QCA_WCN3990)
> + if (qca_is_wcn399x(qcadev->btsoc_type))
> qca_power_shutdown(hu);
> else
> gpiod_set_value_cansleep(qcadev->bt_en, 0);
> @@ -1008,7 +1008,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
> msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
>
> /* Give the controller time to process the request */
> - if (qca_soc_type(hu) == QCA_WCN3990)
> + if (qca_is_wcn399x(qca_soc_type(hu)))
> msleep(10);
> else
> msleep(300);
> @@ -1084,7 +1084,7 @@ static unsigned int qca_get_speed(struct hci_uart *hu,
>
> static int qca_check_speeds(struct hci_uart *hu)
> {
> - if (qca_soc_type(hu) == QCA_WCN3990) {
> + if (qca_is_wcn399x(qca_soc_type(hu))) {
> if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
> !qca_get_speed(hu, QCA_OPER_SPEED))
> return -EINVAL;
> @@ -1116,7 +1116,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
> /* Disable flow control for wcn3990 to deassert RTS while
> * changing the baudrate of chip and host.
> */
> - if (soc_type == QCA_WCN3990)
> + if (qca_is_wcn399x(soc_type))
> hci_uart_set_flow_control(hu, true);
>
> qca_baudrate = qca_get_baudrate_value(speed);
> @@ -1128,7 +1128,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
> host_set_baudrate(hu, speed);
>
> error:
> - if (soc_type == QCA_WCN3990)
> + if (qca_is_wcn399x(soc_type))
> hci_uart_set_flow_control(hu, false);
> }
>
> @@ -1201,7 +1201,7 @@ static int qca_setup(struct hci_uart *hu)
> /* Patch downloading has to be done without IBS mode */
> clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
>
> - if (soc_type == QCA_WCN3990) {
> + if (qca_is_wcn399x(soc_type)) {
> bt_dev_info(hdev, "setting up wcn3990");
>
> /* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
> @@ -1232,7 +1232,7 @@ static int qca_setup(struct hci_uart *hu)
> qca_baudrate = qca_get_baudrate_value(speed);
> }
>
> - if (soc_type != QCA_WCN3990) {
> + if (!qca_is_wcn399x(soc_type)) {
> /* Get QCA version information */
> ret = qca_read_soc_version(hdev, &soc_ver);
> if (ret)
> @@ -1257,7 +1257,7 @@ static int qca_setup(struct hci_uart *hu)
> }
>
> /* Setup bdaddr */
> - if (soc_type == QCA_WCN3990)
> + if (qca_is_wcn399x(soc_type))
> hu->hdev->set_bdaddr = qca_set_bdaddr;
> else
> hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
> @@ -1280,7 +1280,7 @@ static int qca_setup(struct hci_uart *hu)
> .dequeue = qca_dequeue,
> };
>
> -static const struct qca_vreg_data qca_soc_data = {
> +static const struct qca_vreg_data qca_soc_data_wcn3990 = {
> .soc_type = QCA_WCN3990,
> .vregs = (struct qca_vreg []) {
> { "vddio", 1800000, 1900000, 15000 },
> @@ -1291,6 +1291,17 @@ static int qca_setup(struct hci_uart *hu)
> .num_vregs = 4,
> };
>
> +static const struct qca_vreg_data qca_soc_data_wcn3998 = {
> + .soc_type = QCA_WCN3998,
> + .vregs = (struct qca_vreg []) {
> + { "vddio", 1800000, 1900000, 10000 },
> + { "vddxo", 1800000, 1900000, 80000 },
> + { "vddrf", 1300000, 1352000, 300000 },
> + { "vddch0", 3300000, 3300000, 450000 },
> + },
> + .num_vregs = 4,
> +};
> +
> static void qca_power_shutdown(struct hci_uart *hu)
> {
> struct qca_data *qca = hu->priv;
> @@ -1424,8 +1435,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
> qcadev->serdev_hu.serdev = serdev;
> data = of_device_get_match_data(&serdev->dev);
> serdev_device_set_drvdata(serdev, qcadev);
> - if (data && data->soc_type == QCA_WCN3990) {
> - qcadev->btsoc_type = QCA_WCN3990;
> + if (data && qca_is_wcn399x(data->soc_type)) {
> + qcadev->btsoc_type = data->soc_type;
> qcadev->bt_power = devm_kzalloc(&serdev->dev,
> sizeof(struct qca_power),
> GFP_KERNEL);
> @@ -1489,7 +1500,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
> {
> struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
>
> - if (qcadev->btsoc_type == QCA_WCN3990)
> + if (qca_is_wcn399x(qcadev->btsoc_type))
> qca_power_shutdown(&qcadev->serdev_hu);
> else
> clk_disable_unprepare(qcadev->susclk);
> @@ -1499,7 +1510,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)
>
> static const struct of_device_id qca_bluetooth_of_match[] = {
> { .compatible = "qcom,qca6174-bt" },
> - { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data},
> + { .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
> + { .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
A suggestion for patch submission: it is often good to wait a few days
before sending a new revision to give other reviewers time to
comment. Reviewers may disagree with each other, this can then often
be sorted out on the mailing list, rather than changing the code back
and forth. Also it may save you a revision or two.
That said, there are no hard rules and there is nothing wrong with
being responsive, especially when bugs are pointed out. Just something
to keep in mind and consider on a per patch/revision basis :)
Cheers
Matthias
next prev parent reply other threads:[~2019-03-27 16:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-27 12:28 [PATCH v6 0/2] Enable Bluetooth functionality for WCN3998 Harish Bandi
2019-03-27 12:28 ` [PATCH v6 1/2] Bluetooth: hci_qca: Added support " Harish Bandi
2019-03-27 16:46 ` Balakrishna Godavarthi
2019-03-27 16:56 ` Matthias Kaehlcke [this message]
2019-03-29 4:40 ` Harish Bandi
2019-03-28 21:05 ` kbuild test robot
2019-03-28 21:23 ` Matthias Kaehlcke
2019-03-29 4:42 ` Harish Bandi
2019-03-27 12:28 ` [PATCH v6 2/2] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip WCN3998 Harish Bandi
2019-03-27 17:29 ` Matthias Kaehlcke
2019-03-29 4:38 ` Harish Bandi
2019-04-01 12:39 ` Harish Bandi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190327165615.GC112750@google.com \
--to=mka@chromium.org \
--cc=anubhavg@codeaurora.org \
--cc=bgodavar@codeaurora.org \
--cc=c-hbandi@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).