[PATCH v3 0/5] ARM: imx7s: add media nodes

[Rui Miguel Silva <rui.silva@linaro.org>]

This series is a continuation of the
[PATCH v14 00/13] media: staging/imx7: add i.MX7 media driver [0] series.
All code patches and bindings are already merged, missing only this
dts patches.

The main difference from the version in the previous series is as
commented by Laurent:
 - split of dtsi and dts in 2 patches
 - push endpoints to imx7s.dtsi

Cheers,
   Rui

v2->v3:
Laurent Pinchart:
  - Add label to csi-mux
  - Disable csi-mux in imx7s
  - enable it in warp dts
  - add port@0 to mux

v1->v2:
Shawn Guo:
  - sort alphabetically
  - hyphen for node name
  - indent align clocks
  - send status to end of property list

Rui Miguel Silva (5):
  ARM: dts: imx7s: add mipi phy power domain
  ARM: dts: imx7s: add multiplexer controls
  ARM: dts: imx7s: Add video mux, csi and mipi_csi
  ARM: dts: imx7s-warp: add csi and mipi_csi node
  ARM: dts: imx7s-warp: add ov2680 sensor node

 arch/arm/boot/dts/imx7s-warp.dts | 59 ++++++++++++++++++++
 arch/arm/boot/dts/imx7s.dtsi     | 92 +++++++++++++++++++++++++++++++-
 2 files changed, 149 insertions(+), 2 deletions(-)

-- 
2.21.0