From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Sender: Guenter Roeck Date: Fri, 29 Mar 2019 09:53:07 -0700 From: Guenter Roeck Subject: Re: [PATCH v4 1/2] hwmon: lochnagar: Add device tree binding document Message-ID: <20190329165307.GA6085@roeck-us.net> References: <20190328130937.3756-1-ckeepax@opensource.cirrus.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20190328130937.3756-1-ckeepax@opensource.cirrus.com> To: Charles Keepax Cc: jdelvare@suse.com, robh+dt@kernel.org, mark.rutland@arm.com, linux-hwmon@vger.kernel.org, corbet@lwn.net, devicetree@vger.kernel.org, patches@opensource.cirrus.com List-ID: On Thu, Mar 28, 2019 at 01:09:36PM +0000, Charles Keepax wrote: > Lochnagar is an evaluation and development board for Cirrus > Logic Smart CODEC and Amp devices. It allows the connection of > most Cirrus Logic devices on mini-cards, as well as allowing > connection of various application processor systems to provide a > full evaluation platform. This driver supports the board > controller chip on the Lochnagar board. > > Signed-off-by: Charles Keepax > Reviewed-by: Rob Herring Applied to hwmon-next. Thanks, Guenter > --- > > No changes since v3. > > Thanks, > Charles > > .../devicetree/bindings/hwmon/cirrus,lochnagar.txt | 26 ++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt > new file mode 100644 > index 0000000000000..ffb79ccf51ee3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt > @@ -0,0 +1,26 @@ > +Cirrus Logic Lochnagar Audio Development Board > + > +Lochnagar is an evaluation and development board for Cirrus Logic > +Smart CODEC and Amp devices. It allows the connection of most Cirrus > +Logic devices on mini-cards, as well as allowing connection of > +various application processor systems to provide a full evaluation > +platform. Audio system topology, clocking and power can all be > +controlled through the Lochnagar, allowing the device under test > +to be used in a variety of possible use cases. > + > +This binding document describes the binding for the hardware monitor > +portion of the driver. > + > +This binding must be part of the Lochnagar MFD binding: > + [4] ../mfd/cirrus,lochnagar.txt > + > +Required properties: > + > + - compatible : One of the following strings: > + "cirrus,lochnagar2-hwmon" > + > +Example: > + > +lochnagar-hwmon { > + compatible = "cirrus,lochnagar2-hwmon"; > +};