From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCH v3 2/4] dt-bindings: maxbotix,mb1232: Add MaxBotix i2c ultrasonic rangers Date: Sun, 31 Mar 2019 11:34:07 +0100 Message-ID: <20190331113407.5df5f41d@archlinux> References: <20190317203526.4pcwo4gdrrng44v7@arbad> <20190328175134.GA15033@bogus> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190328175134.GA15033@bogus> Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring Cc: Andreas Klinger , devicetree@vger.kernel.org, linux-iio@vger.kernel.org, mark.rutland@arm.com, afaerber@suse.de, arnd@arndb.de, davem@davemloft.net, gregkh@linuxfoundation.org, johan@kernel.org, khilman@baylibre.com, knaack.h@gmx.de, lars@metafoo.de, linux-kernel@vger.kernel.org, martin.blumenstingl@googlemail.com, mchehab+samsung@kernel.org, m.othacehe@gmail.com, nicolas.ferre@microchip.com, pmeerw@pmeerw.net, songqiang1304521@gmail.com, treding@nvidia.com, techsupport@maxbotix.com List-Id: devicetree@vger.kernel.org On Thu, 28 Mar 2019 12:51:35 -0500 Rob Herring wrote: > On Sun, Mar 17, 2019 at 09:35:27PM +0100, Andreas Klinger wrote: > > Add doc for dt binding maxbotix,mb1232. This binding is for MaxBotix > > I2CXL-MaxSonar ultrasonic rangers which share a common i2c interface. > > > > Signed-off-by: Andreas Klinger > > --- > > .../bindings/iio/proximity/maxbotix,mb1232.txt | 31 ++++++++++++++++++++++ > > 1 file changed, 31 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt > > > > diff --git a/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt > > new file mode 100644 > > index 000000000000..0e9df87eca1d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt > > @@ -0,0 +1,31 @@ > > +* MaxBotix I2CXL-MaxSonar ultrasonic distance sensor of type mb1202, > > + mb1212, mb1222, mb1232, mb1242, mb7040 or mb7137 using the i2c interface > > + for ranging > > + > > +Required properties: > > + - compatible: "maxbotix,mb1202", > > + "maxbotix,mb1212", > > + "maxbotix,mb1222", > > + "maxbotix,mb1232", > > + "maxbotix,mb1242", > > + "maxbotix,mb7040" or > > + "maxbotix,mb7137" > > + > > + - reg: i2c address of the device, see also i2c/i2c.txt > > + > > +Optional properties: > > + - interrupt-parent: Interrupt controller to use > > Don't need this as it is implied and could be in the parent. > > Otherwise, > > Reviewed-by: Rob Herring I tidied that up. Thanks, Jonathan > > > + > > + - interrupts: Interrupt used to announce the preceding reading > > + request has finished and that data is available. > > + If no interrupt is specified the device driver > > + falls back to wait a fixed amount of time until > > + data can be retrieved. > > + > > +Example: > > +proximity@70 { > > + compatible = "maxbotix,mb1232"; > > + reg = <0x70>; > > + interrupt-parent = <&gpio2>; > > + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; > > +}; > > -- > > 2.11.0