From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel Raynal Subject: [PATCH 06/15] phy: mvebu-cp110-comphy: Allow non-Ethernet modes to be configured Date: Mon, 1 Apr 2019 18:51:22 +0200 Message-ID: <20190401165131.23370-7-miquel.raynal@bootlin.com> References: <20190401165131.23370-1-miquel.raynal@bootlin.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190401165131.23370-1-miquel.raynal@bootlin.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Gregory Clement , Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Kishon Vijay Abraham I Cc: devicetree@vger.kernel.org, Antoine Tenart , Russell King , Maxime Chevallier , Nadav Haklai , Rob Herring , Thomas Petazzoni , Miquel Raynal , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org The COMPHY can configure the SERDES lanes in several non-Ethernet modes: SATA, USB3, PCIe. Drop the condition limiting the driver to Ethernet modes only before adding support for more. Signed-off-by: Miquel Raynal --- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c index f8f2bca7413d..21431e3e085a 100644 --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c @@ -639,9 +639,6 @@ static int mvebu_comphy_set_mode(struct phy *phy, { struct mvebu_comphy_lane *lane = phy_get_drvdata(phy); - if (mode != PHY_MODE_ETHERNET) - return -EINVAL; - if (submode == PHY_INTERFACE_MODE_1000BASEX) submode = PHY_INTERFACE_MODE_SGMII; -- 2.19.1