From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Belloni Subject: Re: [PATCH 1/2] dt-bindings: rtc: add battery-low-hw-alarm property Date: Wed, 3 Apr 2019 16:57:09 +0200 Message-ID: <20190403145709.GN22216@piout.net> References: <1554303165-24813-1-git-send-email-f.suligoi@asem.it> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1554303165-24813-1-git-send-email-f.suligoi@asem.it> Sender: linux-kernel-owner@vger.kernel.org To: Flavio Suligoi Cc: Alessandro Zummo , Rob Herring , Mark Rutland , linux-rtc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Hi, On 03/04/2019 16:52:44+0200, Flavio Suligoi wrote: > Some RTC devices have a battery-low automatic detection circuit. > The battery-low event is usually reported with: > > - a bit change in a RTC status register > - a hw signaling (generally using an interrupt generation), changing > the hw level of a specific pin; > > The new property "battery-low-hw-alarm" enable the RTC to generate the > hw signaling in case of battery-low event. > > Signed-off-by: Flavio Suligoi > --- > Documentation/devicetree/bindings/rtc/rtc.txt | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt > index a97fc6a..f93a44d 100644 > --- a/Documentation/devicetree/bindings/rtc/rtc.txt > +++ b/Documentation/devicetree/bindings/rtc/rtc.txt > @@ -31,6 +31,9 @@ below. > expressed in femto Farad (fF). > The default value shall be listed (if optional), > and likewise all valid values. > +- battery-low-hw-alarm : Enable the "battery-low" output pin. This function I would name that voltage-low-alarm as not all the secondary voltages are batteries. > + is available on the following devices: > + - pcf2127 - pin used for alarm: INTn > > Trivial RTCs > ------------ > -- > 2.7.4 > -- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com