From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lucas Stach Subject: [PATCH 2/2] phy: fsl-imx8mq-usb: add support for VBUS power control Date: Thu, 4 Apr 2019 18:41:48 +0200 Message-ID: <20190404164148.11140-2-l.stach@pengutronix.de> References: <20190404164148.11140-1-l.stach@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190404164148.11140-1-l.stach@pengutronix.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Kishon Vijay Abraham I , Rob Herring Cc: devicetree@vger.kernel.org, patchwork-lst@pengutronix.de, NXP Linux Team , kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org, Li Jun List-Id: devicetree@vger.kernel.org This adds support to the PHY driver to power up/down the VBUS voltage rail at the appropriate times. Signed-off-by: Lucas Stach --- drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c index d6ea5ce8afa5..0a3e88e37ab5 100644 --- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c +++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c @@ -6,6 +6,7 @@ #include #include #include +#include #define PHY_CTRL0 0x0 #define PHY_CTRL0_REF_SSP_EN BIT(2) @@ -24,6 +25,7 @@ struct imx8mq_usb_phy { struct phy *phy; struct clk *clk; void __iomem *base; + struct regulator *vbus; }; static int imx8mq_usb_phy_init(struct phy *phy) @@ -55,6 +57,11 @@ static int imx8mq_usb_phy_init(struct phy *phy) static int imx8mq_phy_power_on(struct phy *phy) { struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); + int ret; + + ret = regulator_enable(imx_phy->vbus); + if (ret) + return ret; return clk_prepare_enable(imx_phy->clk); } @@ -64,6 +71,7 @@ static int imx8mq_phy_power_off(struct phy *phy) struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); clk_disable_unprepare(imx_phy->clk); + regulator_disable(imx_phy->vbus); return 0; } @@ -101,6 +109,11 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev) if (IS_ERR(imx_phy->phy)) return PTR_ERR(imx_phy->phy); + imx_phy->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(imx_phy->vbus)) + return PTR_ERR(imx_phy->vbus); + + phy_set_drvdata(imx_phy->phy, imx_phy); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); -- 2.20.1