[PATCH v2 0/5] Add bluetooth, gps and accelerometer to TBS A711

megous via linux-sunxi
2019-04-01T11:56:11Z

From: Ondrej Jirman <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org>

This series enables some peripherals on TBS A711 tablet that already
have mainline drivers:

- GPS u-blox neo-6m (via gnss u-blox driver)
- Bluetooth (via recently added OF support in the Broadcom
bluetooth driver)
- Accelermomter BMA-250 (hooked to the I2C bus)

It also modifies A83T DTSI and adds missing UART interfaces.

I've added additional compatible to the gnss/u-blox driver for NEO-6M,
because this board uses this module, and I don't think I can use
the existing compatible for u-blox,neo-m8, even as a fallback.

Please take a look, and apply the patches if you have no objections.

Many of the patches will go through the sunxi tree, but I'm not
sure who will want to take the GPS patches.

regards,
Ondrej Jirman

Changes in v2:
- dropped already applied patches from the series (bluetooth,
a83t uarts)
- added /omit-if-no-ref/ to "uart2-pb-pins"
- renamed node "bma250" to "accelerometer"
- removed pinctrl properties that are already in base dtsi
(i2c1_pins)

Ondrej Jirman (5):
ARM: dts: sun8i: tbs-a711: Add node for BMA250 accelerometer
ARM: dts: sun8i: a83t: Add UART2 PB pins
gnss: Add u-blox,neo-6m compatible
dt-bindings: gnss: Add u-blox,neo-6m compatible
ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module)

.../devicetree/bindings/gnss/u-blox.txt | 1 +
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 34 +++++++++++++++++++
arch/arm/boot/dts/sun8i-a83t.dtsi | 6 ++++
drivers/gnss/ubx.c | 1 +
4 files changed, 42 insertions(+)

--
2.21.0