Re: [PATCH v4 1/3] firmware: xilinx: Add fpga API's

[Moritz Fischer <mdf@kernel.org>]

Hi Nava,

On Tue, Apr 02, 2019 at 06:01:21PM +0530, Nava kishore Manne wrote:
> This Patch Adds fpga API's to support the Bitstream loading
> by using firmware interface.
> 
> Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
> ---
> Changes for v4:
> 		-None.
> 
> Chnages for v3:
> 		-Created patches on top of 5.0-rc5.
> 		 No functional changes.
> 
> Changes for v2:
> 		-Added Firmware FPGA Manager flags As suggested by
> 		 Moritz.
> 
> Changes for v1:
> 		-None.
> 
> Changes for RFC-V2:
> 		-New Patch
> 
>  drivers/firmware/xilinx/zynqmp.c     | 46 ++++++++++++++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h | 10 ++++++
>  2 files changed, 56 insertions(+)
> 
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 98f936125643..7159a90abc44 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -537,6 +537,50 @@ static int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset,
>  	return ret;
>  }
>  
> +/*
> + * zynqmp_pm_fpga_load - Perform the fpga load
> + * @address:	Address to write to
> + * @size:	pl bitstream size
> + * @flags:
> + *	BIT(0) - Bit-stream type.
> + *		 0 - Full Bitstream.
> + *		 1 - Partial Bitstream.
> + *
> + * This function provides access to pmufw. To transfer
> + * the required bitstream into PL.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_fpga_load(const u64 address, const u32 size,
> +			       const u32 flags)
> +{
> +	return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
> +				   upper_32_bits(address), size, flags, NULL);
> +}
> +
> +/**
> + * zynqmp_pm_fpga_get_status - Read value from PCAP status register
> + * @value: Value to read
> + *
> + * This function provides access to the xilfpga library to get

xilfpga? Is that PMU firmware you're talking about?

> + * the PCAP status
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_fpga_get_status(u32 *value)
> +{
> +	u32 ret_payload[PAYLOAD_ARG_CNT];
> +	int ret;
> +
> +	if (!value)
> +		return -EINVAL;
> +
> +	ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload);
> +	*value = ret_payload[1];
> +
> +	return ret;
> +}
> +
>  /**
>   * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
>   *			       master has initialized its own power management
> @@ -640,6 +684,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
>  	.request_node = zynqmp_pm_request_node,
>  	.release_node = zynqmp_pm_release_node,
>  	.set_requirement = zynqmp_pm_set_requirement,
> +	.fpga_load = zynqmp_pm_fpga_load,
> +	.fpga_get_status = zynqmp_pm_fpga_get_status,
>  };
>  
>  /**
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
> index 642dab10f65d..4df226b6ab0f 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -48,6 +48,12 @@
>  #define	ZYNQMP_PM_CAPABILITY_WAKEUP	0x4U
>  #define	ZYNQMP_PM_CAPABILITY_POWER	0x8U
>  
> +/*
> + * Firmware FPGA Manager flags
> + * XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration
> + */
> +#define XILINX_ZYNQMP_PM_FPGA_PARTIAL	BIT(0)
> +
>  enum pm_api_id {
>  	PM_GET_API_VERSION = 1,
>  	PM_REQUEST_NODE = 13,
> @@ -56,6 +62,8 @@ enum pm_api_id {
>  	PM_RESET_ASSERT = 17,
>  	PM_RESET_GET_STATUS,
>  	PM_PM_INIT_FINALIZE = 21,
> +	PM_FPGA_LOAD = 22,
> +	PM_FPGA_GET_STATUS,

Any reason you can't do 'PM_FPGA_GET_STATUS = 23' here? Trying to
understand your reasoning. Are you planning to move them around?
>  	PM_GET_CHIPID = 24,
>  	PM_IOCTL = 34,
>  	PM_QUERY_DATA,
> @@ -258,6 +266,8 @@ struct zynqmp_pm_query_data {
>  struct zynqmp_eemi_ops {
>  	int (*get_api_version)(u32 *version);
>  	int (*get_chipid)(u32 *idcode, u32 *version);
> +	int (*fpga_load)(const u64 address, const u32 size, const u32 flags);
> +	int (*fpga_get_status)(u32 *value);
>  	int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
>  	int (*clock_enable)(u32 clock_id);
>  	int (*clock_disable)(u32 clock_id);
> -- 
> 2.18.0
> 

Thanks,
Moritz