From: Shawn Guo <shawnguo@kernel.org>
To: "Andrew F. Davis" <afd@ti.com>
Cc: "Sascha Hauer" <s.hauer@pengutronix.de>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
devicetree@vger.kernel.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/4] ARM: dts: imx6: RDU2: Use new CODEC reset pin name
Date: Thu, 11 Apr 2019 10:42:51 +0800 [thread overview]
Message-ID: <20190411024250.GL26817@dragon> (raw)
In-Reply-To: <20190329181313.21009-1-afd@ti.com>
On Fri, Mar 29, 2019 at 01:13:10PM -0500, Andrew F. Davis wrote:
> The correct DT property for specifying a GPIO used for reset
> is "reset-gpios", the driver now accepts this name, use it here.
>
> Note the GPIO polarity in the driver was ignored before and always
> assumed to be active low, when all the DTs are fixed we will start
> respecting the specified polarity. Switch polarity in DT to the
> currently assumed one, this way when the driver changes the
> behavior will not change.
>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
I fixed up the prefix to use board name, and applied patch #1 ~ #3.
Shawn
prev parent reply other threads:[~2019-04-11 2:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-29 18:13 [PATCH 1/4] ARM: dts: imx6: RDU2: Use new CODEC reset pin name Andrew F. Davis
2019-03-29 18:13 ` [PATCH 2/4] ARM: dts: imx: " Andrew F. Davis
2019-03-29 18:13 ` [PATCH 3/4] ARM: dts: imx6qdl: " Andrew F. Davis
2019-03-29 18:13 ` [PATCH 4/4] ARM: dts: omap2420-n810: " Andrew F. Davis
2019-04-09 15:10 ` Tony Lindgren
2019-04-11 2:42 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190411024250.GL26817@dragon \
--to=shawnguo@kernel.org \
--cc=afd@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).