devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Robert Jones <rjones@gateworks.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-iio@vger.kernel.org,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Subject: Re: [PATCH v2 2/2] iio: accel: add support to LIS2DE12
Date: Sun, 14 Apr 2019 11:05:39 +0100	[thread overview]
Message-ID: <20190414110539.14b2cb92@archlinux> (raw)
In-Reply-To: <20190411001209.29488-3-rjones@gateworks.com>

On Wed, 10 Apr 2019 17:12:09 -0700
Robert Jones <rjones@gateworks.com> wrote:

> Add support to STMicroelectronics LIS2DE12 accelerometer in
> st_accel framework.
> 
> http://www.st.com/resource/en/datasheet/lis2de12.pdf
> 
> Signed-off-by: Robert Jones <rjones@gateworks.com>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan

> ---
>  drivers/iio/accel/Kconfig         |  2 +-
>  drivers/iio/accel/st_accel.h      |  2 ++
>  drivers/iio/accel/st_accel_core.c | 76 +++++++++++++++++++++++++++++++++++++++
>  drivers/iio/accel/st_accel_i2c.c  |  5 +++
>  4 files changed, 84 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 4a1f133..62a970a 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -223,7 +223,7 @@ config IIO_ST_ACCEL_3AXIS
>  	  Say yes here to build support for STMicroelectronics accelerometers:
>  	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
>  	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
> -	  LNG2DM, LIS3DE
> +	  LNG2DM, LIS3DE, LIS2DE12
>  
>  	  This driver can also be built as a module. If so, these modules
>  	  will be created:
> diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
> index fd53258..9d25955 100644
> --- a/drivers/iio/accel/st_accel.h
> +++ b/drivers/iio/accel/st_accel.h
> @@ -34,6 +34,7 @@ enum st_accel_type {
>  	LIS3LV02DL,
>  	LIS2DW12,
>  	LIS3DHH,
> +	LIS2DE12,
>  	ST_ACCEL_MAX,
>  };
>  
> @@ -57,6 +58,7 @@ enum st_accel_type {
>  #define LIS2DW12_ACCEL_DEV_NAME		"lis2dw12"
>  #define LIS3DHH_ACCEL_DEV_NAME		"lis3dhh"
>  #define LIS3DE_ACCEL_DEV_NAME		"lis3de"
> +#define LIS2DE12_ACCEL_DEV_NAME		"lis2de12"
>  
>  /**
>  * struct st_sensors_platform_data - default accel platform data
> diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
> index 9930edf..5ff04d9 100644
> --- a/drivers/iio/accel/st_accel_core.c
> +++ b/drivers/iio/accel/st_accel_core.c
> @@ -831,6 +831,82 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
>  		.multi_read_bit = false,
>  		.bootime = 2,
>  	},
> +	{
> +		.wai = 0x33,
> +		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
> +		.sensors_supported = {
> +			[0] = LIS2DE12_ACCEL_DEV_NAME,
> +		},
> +		.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
> +		.odr = {
> +			.addr = 0x20,
> +			.mask = 0xf0,
> +			.odr_avl = {
> +				{ .hz = 1, .value = 0x01, },
> +				{ .hz = 10, .value = 0x02, },
> +				{ .hz = 25, .value = 0x03, },
> +				{ .hz = 50, .value = 0x04, },
> +				{ .hz = 100, .value = 0x05, },
> +				{ .hz = 200, .value = 0x06, },
> +				{ .hz = 400, .value = 0x07, },
> +				{ .hz = 1620, .value = 0x08, },
> +				{ .hz = 5376, .value = 0x09, },
> +			},
> +		},
> +		.pw = {
> +			.addr = 0x20,
> +			.mask = 0xf0,
> +			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
> +		},
> +		.enable_axis = {
> +			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
> +			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
> +		},
> +		.fs = {
> +			.addr = 0x23,
> +			.mask = 0x30,
> +			.fs_avl = {
> +				[0] = {
> +					.num = ST_ACCEL_FS_AVL_2G,
> +					.value = 0x00,
> +					.gain = IIO_G_TO_M_S_2(15600),
> +				},
> +				[1] = {
> +					.num = ST_ACCEL_FS_AVL_4G,
> +					.value = 0x01,
> +					.gain = IIO_G_TO_M_S_2(31200),
> +				},
> +				[2] = {
> +					.num = ST_ACCEL_FS_AVL_8G,
> +					.value = 0x02,
> +					.gain = IIO_G_TO_M_S_2(62500),
> +				},
> +				[3] = {
> +					.num = ST_ACCEL_FS_AVL_16G,
> +					.value = 0x03,
> +					.gain = IIO_G_TO_M_S_2(187500),
> +				},
> +			},
> +		},
> +		.drdy_irq = {
> +			.int1 = {
> +				.addr = 0x22,
> +				.mask = 0x10,
> +			},
> +			.addr_ihl = 0x25,
> +			.mask_ihl = 0x02,
> +			.stat_drdy = {
> +				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
> +				.mask = 0x07,
> +			},
> +		},
> +		.sim = {
> +			.addr = 0x23,
> +			.value = BIT(0),
> +		},
> +		.multi_read_bit = true,
> +		.bootime = 2,
> +	},
>  };
>  
>  static int st_accel_read_raw(struct iio_dev *indio_dev,
> diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
> index de8ae43..4e54477 100644
> --- a/drivers/iio/accel/st_accel_i2c.c
> +++ b/drivers/iio/accel/st_accel_i2c.c
> @@ -102,6 +102,10 @@ static const struct of_device_id st_accel_of_match[] = {
>  		.compatible = "st,lis3de",
>  		.data = LIS3DE_ACCEL_DEV_NAME,
>  	},
> +	{
> +		.compatible = "st,lis2de12",
> +		.data = LIS2DE12_ACCEL_DEV_NAME,
> +	},
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, st_accel_of_match);
> @@ -140,6 +144,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
>  	{ LIS3LV02DL_ACCEL_DEV_NAME },
>  	{ LIS2DW12_ACCEL_DEV_NAME },
>  	{ LIS3DE_ACCEL_DEV_NAME },
> +	{ LIS2DE12_ACCEL_DEV_NAME },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(i2c, st_accel_id_table);

      reply	other threads:[~2019-04-14 10:05 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-05 20:32 [PATCH 0/2] iio: accel: add support for LIS2DE12 Robert Jones
2019-03-05 20:32 ` [PATCH 1/2] dt-bindings: iio: accel: add LIS2DE12 sensor device binding Robert Jones
2019-03-09  1:14   ` Denis CIOCCA
2019-03-09 18:20     ` Jonathan Cameron
2019-03-09 18:23       ` Jonathan Cameron
2019-03-11 16:31         ` Bobby Jones
2019-03-11 23:02         ` Denis CIOCCA
2019-03-16 15:06           ` Jonathan Cameron
2019-03-05 20:32 ` [PATCH 2/2] iio: accel: add support to LIS2DE12 Robert Jones
2019-03-09  1:14   ` Denis CIOCCA
2019-03-16 15:06     ` Jonathan Cameron
2019-03-16 15:12       ` Jonathan Cameron
2019-04-11  0:12 ` [PATCH v2 0/2] iio: accel: add support for LIS2DE12 Robert Jones
2019-04-11  0:12   ` [PATCH v2 1/2] dt-bindings: iio: accel: add LIS2DE12 sensor device binding Robert Jones
2019-04-14 10:04     ` Jonathan Cameron
2019-04-11  0:12   ` [PATCH v2 2/2] iio: accel: add support to LIS2DE12 Robert Jones
2019-04-14 10:05     ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190414110539.14b2cb92@archlinux \
    --to=jic23@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pmeerw@pmeerw.net \
    --cc=rjones@gateworks.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).