From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Angus Ainslie (Purism)" Subject: [PATCH v4 0/2] Add support for the Purism Librem5 devkit Date: Mon, 15 Apr 2019 16:53:41 -0700 Message-ID: <20190415235343.16565-1-angus@akkea.ca> Return-path: Sender: linux-kernel-owner@vger.kernel.org Cc: Rob Herring , Mark Rutland , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , NXP Linux Team , "Angus Ainslie (Purism)" , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org The Librem5 devkit is based on the imx8mq from NXP. This is a default devicetree to boot the board to a command prompt. Changes since v3: Freshly sorted and pressed nodes. Change the backlight to an interpolated scale. Dropped i2c2. Dropped devkit version number to match debian MR. Changes since v2: Fixed incorrect phy-supply for the fsl-fec. Dropped unused regulator property. Fixup Makefile for linux-next. Changes since v1: Dropped config file. Updated the board compatible label. Changed node names to follow naming conventions. Added a more complete regulator hierachy. Removed unused nodes. Removed unknown devices. Fixed comment style. Dropped undocumented properties. Angus Ainslie (Purism) (2): arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit dt-bindings: Add an entry for Purism SPC .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mq-librem5-devkit.dts | 822 ++++++++++++++++++ 3 files changed, 824 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts -- 2.17.1