From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Subject: Re: [PATCH] arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable CAN Date: Thu, 18 Apr 2019 16:56:41 +0200 Message-ID: <20190418145641.q23tupopz2czjzc5@flea> References: <20190418141658.10868-1-jagan@amarulasolutions.com> Reply-To: maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha256; protocol="application/pgp-signature"; boundary="ubqlaoup2nr4gj7m" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Content-Disposition: inline In-Reply-To: <20190418141658.10868-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Jagan Teki Cc: Chen-Yu Tsai , Rob Herring , Mark Rutland , Michael Trimarchi , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org --ubqlaoup2nr4gj7m Content-Type: text/plain; charset="UTF-8" Content-Disposition: inline On Thu, Apr 18, 2019 at 07:46:58PM +0530, Jagan Teki wrote: > Oceanic 5205 5inMFD has MCP2515 CAN device connected via SPI1. > > - via SPI1 bus > - vdd supplied by 5V supply along with PL2 enable pin > - xceiver supply same as vdd > - can oscillator connected at 20MHz > - PB2 gpio as interrupt pin > - PD6 gpio as RX_BUF1_CAN0 > - PD7 gpio as RX_BUF0_CAN0 > > Tested-by: Tamas Papp > Signed-off-by: Jagan Teki > --- > .../sun50i-a64-oceanic-5205-5inmfd.dts | 43 +++++++++++++++++++ > 1 file changed, 43 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts > index f0cd6587f619..22535a297f51 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts > @@ -21,6 +21,24 @@ > chosen { > stdout-path = "serial0:115200n8"; > }; > + > + can_osc: can-osc { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <20000000>; > + }; > + > + reg_can_v5v: reg-can-v5v { > + compatible = "regulator-fixed"; > + regulator-name = "reg-can-v5v"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-boot-on; > + enable-active-high; > + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* CAN_3V3_EN: PL2 */ > + status = "okay"; You don't need the status property here. > + }; > + > }; > > &ehci0 { > @@ -77,6 +95,31 @@ > status = "okay"; > }; > > +&pio { > + can_pins: can-pins { > + pins = "PD6", /* RX_BUF1_CAN0 */ > + "PD7"; /* RX_BUF0_CAN0 */ > + function = "gpio_in"; > + }; > +}; That isn't needed. What are they used for, you're not tying them to anything? Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com --ubqlaoup2nr4gj7m--