From: Lokesh Vutla <lokeshvutla@ti.com>
To: Marc Zyngier <marc.zyngier@arm.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
Rob Herring <robh+dt@kernel.org>, Nishanth Menon <nm@ti.com>,
tglx@linutronix.de, jason@lakedaemon.net
Cc: Linux ARM Mailing List <linux-arm-kernel@lists.infradead.org>,
linux-kernel@vger.kernel.org, Tero Kristo <t-kristo@ti.com>,
Sekhar Nori <nsekhar@ti.com>, Tony Lindgren <tony@atomide.com>,
linus.walleij@linaro.org, Peter Ujfalusi <peter.ujfalusi@ti.com>,
Grygorii Strashko <grygorii.strashko@ti.com>,
Lokesh Vutla <lokeshvutla@ti.com>,
Device Tree Mailing List <devicetree@vger.kernel.org>
Subject: [PATCH v7 10/14] dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
Date: Sat, 20 Apr 2019 15:39:46 +0530 [thread overview]
Message-ID: <20190420100950.7997-11-lokeshvutla@ti.com> (raw)
In-Reply-To: <20190420100950.7997-1-lokeshvutla@ti.com>
Add the DT binding documentation for Interrupt Aggregator driver.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
Changes since v6:
- None
.../interrupt-controller/ti,sci-inta.txt | 66 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
new file mode 100644
index 000000000000..7841cb099e13
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
@@ -0,0 +1,66 @@
+Texas Instruments K3 Interrupt Aggregator
+=========================================
+
+The Interrupt Aggregator (INTA) provides a centralized machine
+which handles the termination of system events to that they can
+be coherently processed by the host(s) in the system. A maximum
+of 64 events can be mapped to a single interrupt.
+
+
+ Interrupt Aggregator
+ +-----------------------------------------+
+ | Intmap VINT |
+ | +--------------+ +------------+ |
+ m ------>| | vint | bit | | 0 |.....|63| vint0 |
+ . | +--------------+ +------------+ | +------+
+ . | . . | | HOST |
+Globalevents ------>| . . |------>| IRQ |
+ . | . . | | CTRL |
+ . | . . | +------+
+ n ------>| +--------------+ +------------+ |
+ | | vint | bit | | 0 |.....|63| vintx |
+ | +--------------+ +------------+ |
+ | |
+ +-----------------------------------------+
+
+Configuration of these Intmap registers that maps global events to vint is done
+by a system controller (like the Device Memory and Security Controller on K3
+AM654 SoC). Driver should request the system controller to get the range
+of global events and vints assigned to the requesting host. Management
+of these requested resources should be handled by driver and requests
+system controller to map specific global event to vint, bit pair.
+
+Communication between the host processor running an OS and the system
+controller happens through a protocol called TI System Control Interface
+(TISCI protocol). For more details refer:
+Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+TISCI Interrupt Aggregator Node:
+-------------------------------
+- compatible: Must be "ti,sci-inta".
+- reg: Should contain registers location and length.
+- interrupt-controller: Identifies the node as an interrupt controller
+- msi-controller: Identifies the node as an MSI controller.
+- interrupt-parent: phandle of irq parent.
+- ti,sci: Phandle to TI-SCI compatible System controller node.
+- ti,sci-dev-id: TISCI device ID of the Interrupt Aggregator.
+- ti,sci-rm-range-vint: Array of TISCI subtype ids representing vints(inta
+ outputs) range within this INTA, assigned to the
+ requesting host context.
+- ti,sci-rm-range-global-event: Array of TISCI subtype ids representing the
+ global events range reaching this IA and are assigned
+ to the requesting host context.
+
+Example:
+--------
+main_udmass_inta: interrupt-controller@33d00000 {
+ compatible = "ti,sci-inta";
+ reg = <0x0 0x33d00000 0x0 0x100000>;
+ interrupt-controller;
+ msi-controller;
+ interrupt-parent = <&main_navss_intr>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <179>;
+ ti,sci-rm-range-vint = <0x0>;
+ ti,sci-rm-range-global-event = <0x1>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 63851f106b5c..461db0a8233f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15350,6 +15350,7 @@ F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
F: drivers/clk/keystone/sci-clk.c
F: drivers/reset/reset-ti-sci.c
F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
+F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
F: drivers/irqchip/irq-ti-sci-intr.c
Texas Instruments ASoC drivers
--
2.21.0
next prev parent reply other threads:[~2019-04-20 10:09 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-20 10:09 [PATCH v7 00/14] Add support for TISCI Interrupt controller drivers Lokesh Vutla
2019-04-20 10:09 ` [PATCH v7 01/14] firmware: ti_sci: Add support to get TISCI handle using of_phandle Lokesh Vutla
2019-04-20 10:09 ` [PATCH v7 02/14] firmware: ti_sci: Add support for RM core ops Lokesh Vutla
2019-04-20 10:09 ` [PATCH v7 03/14] firmware: ti_sci: Add support for IRQ management Lokesh Vutla
2019-04-20 10:09 ` [PATCH v7 04/14] firmware: ti_sci: Add RM mapping table for am654 Lokesh Vutla
2019-04-20 10:09 ` [PATCH v7 05/14] firmware: ti_sci: Add helper apis to manage resources Lokesh Vutla
2019-04-20 10:09 ` [PATCH v7 06/14] genirq: Introduce irq_chip_{request,release}_resource_parent() apis Lokesh Vutla
2019-04-20 10:09 ` [PATCH v7 07/14] gpio: thunderx: Use the default parent apis for {request,release}_resources Lokesh Vutla
2019-04-23 11:18 ` Linus Walleij
2019-04-20 10:09 ` [PATCH v7 08/14] dt-bindings: irqchip: Introduce TISCI Interrupt router bindings Lokesh Vutla
2019-04-20 10:09 ` [PATCH v7 09/14] irqchip: ti-sci-intr: Add support for Interrupt Router driver Lokesh Vutla
2019-04-20 10:09 ` Lokesh Vutla [this message]
2019-04-20 10:09 ` [PATCH v7 11/14] irqchip: ti-sci-inta: Add support for Interrupt Aggregator driver Lokesh Vutla
2019-04-23 10:00 ` Lokesh Vutla
2019-04-29 8:47 ` Marc Zyngier
2019-04-29 8:59 ` Lokesh Vutla
2019-04-29 10:13 ` Marc Zyngier
2019-04-29 13:11 ` Marc Zyngier
2019-04-30 6:01 ` Lokesh Vutla
2019-04-20 10:09 ` [PATCH v7 12/14] soc: ti: Add MSI domain bus support for Interrupt Aggregator Lokesh Vutla
2019-04-20 10:09 ` [PATCH v7 13/14] irqchip: ti-sci-inta: Add msi domain support Lokesh Vutla
2019-04-20 10:09 ` [PATCH v7 14/14] arm64: arch_k3: Enable interrupt controller drivers Lokesh Vutla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190420100950.7997-11-lokeshvutla@ti.com \
--to=lokeshvutla@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=jason@lakedaemon.net \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
--cc=t-kristo@ti.com \
--cc=tglx@linutronix.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox