From: Yangtao Li <tiny.windzz@gmail.com>
To: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
maxime.ripard@bootlin.com, wens@csie.org, jic23@kernel.org,
knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
Yangtao Li <tiny.windzz@gmail.com>
Subject: [PATCH 6/7] iio: adc: sun4i-gpadc-iio: add support for H6 thermal sensor
Date: Fri, 3 May 2019 03:28:12 -0400 [thread overview]
Message-ID: <20190503072813.2719-7-tiny.windzz@gmail.com> (raw)
In-Reply-To: <20190503072813.2719-1-tiny.windzz@gmail.com>
This patch adds support for the H6 ths sensor.
TODO: calibrate thermal sensor by using information from sid.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
---
drivers/iio/adc/sun4i-gpadc-iio.c | 65 +++++++++++++++++++++++++++++++
include/linux/mfd/sun4i-gpadc.h | 9 +++++
2 files changed, 74 insertions(+)
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
index f24eb76d65c0..9b6fc592f54c 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -120,6 +120,20 @@ static const struct gpadc_data sun8i_a33_gpadc_data = {
.temp_data_base = SUN4I_GPADC_TEMP_DATA,
};
+static int sun50i_gpadc_disable(struct sun4i_gpadc_iio *info);
+static int sun50i_gpadc_enable(struct sun4i_gpadc_iio *info);
+
+static const struct gpadc_data sun50i_h6_gpadc_data = {
+ .temp_offset = -2809,
+ .temp_scale = -67,
+ .has_bus_clk = true,
+ .has_bus_rst = true,
+ .gpadc_enable = sun50i_gpadc_enable,
+ .gpadc_disable = sun50i_gpadc_disable,
+ .sensor_count = 2,
+ .temp_data_base = SUN50I_H6_GPADC_TEMP_DATA,
+};
+
struct sun4i_sensor_tzd {
struct sun4i_gpadc_iio *info;
struct thermal_zone_device *tzd;
@@ -452,6 +466,53 @@ static int sun4i_gpadc_enable(struct sun4i_gpadc_iio *info)
return 0;
}
+static int sun50i_gpadc_enable(struct sun4i_gpadc_iio *info)
+{
+ int ret, val;
+
+ ret = reset_control_deassert(info->reset);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(info->bus_clk);
+ if (ret)
+ goto assert_reset;
+
+ /*
+ * clkin = 24MHz
+ * T acquire = clkin / (SUN50I_GPADC_CTRL0_T_ACQ + 1)
+ * = 20us
+ */
+ regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
+ SUN50I_GPADC_CTRL0_T_ACQ(479));
+ /* average over 4 samples */
+ regmap_write(info->regmap, SUN50I_H6_GPADC_CTRL3,
+ SUN4I_GPADC_CTRL3_FILTER_EN |
+ SUN4I_GPADC_CTRL3_FILTER_TYPE(1));
+ /* period = (SUN50I_GPADC_TPR_TEMP_PERIOD + 1) * 4096 / clkin; ~10ms */
+ regmap_write(info->regmap, SUN50I_GPADC_TPR,
+ SUN50I_GPADC_TPR_TEMP_PERIOD(58));
+ /* TODO: calibrate ths */
+ /* enable sensor */
+ val = GENMASK(info->data->sensor_count - 1, 0);
+ regmap_write(info->regmap, SUN4I_GPADC_CTRL1, val);
+
+ return 0;
+
+assert_reset:
+ reset_control_assert(info->reset);
+
+ return ret;
+}
+
+static int sun50i_gpadc_disable(struct sun4i_gpadc_iio *info)
+{
+ clk_disable_unprepare(info->bus_clk);
+ reset_control_assert(info->reset);
+
+ return 0;
+}
+
static int sun4i_gpadc_runtime_suspend(struct device *dev)
{
struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
@@ -546,6 +607,10 @@ static const struct of_device_id sun4i_gpadc_of_id[] = {
.compatible = "allwinner,sun8i-a33-ths",
.data = &sun8i_a33_gpadc_data,
},
+ {
+ .compatible = "allwinner,sun50i-h6-ths",
+ .data = &sun50i_h6_gpadc_data,
+ },
{ /* sentinel */ }
};
diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
index 139872c2e0fe..f505013e9c0d 100644
--- a/include/linux/mfd/sun4i-gpadc.h
+++ b/include/linux/mfd/sun4i-gpadc.h
@@ -19,6 +19,9 @@
#define SUN4I_GPADC_CTRL0_FS_DIV(x) ((GENMASK(3, 0) & (x)) << 16)
#define SUN4I_GPADC_CTRL0_T_ACQ(x) (GENMASK(15, 0) & (x))
+/* TP_CTRL0 bits for sun50i SOCs */
+#define SUN50I_GPADC_CTRL0_T_ACQ(x) ((GENMASK(15, 0) & (x)) << 16)
+
#define SUN4I_GPADC_CTRL1 0x04
#define SUN4I_GPADC_CTRL1_STYLUS_UP_DEBOUNCE(x) ((GENMASK(7, 0) & (x)) << 12)
@@ -49,6 +52,9 @@
#define SUN4I_GPADC_CTRL2_PRE_MEA_EN BIT(24)
#define SUN4I_GPADC_CTRL2_PRE_MEA_THRE_CNT(x) (GENMASK(23, 0) & (x))
+#define SUN50I_GPADC_TPR 0x08
+#define SUN50I_GPADC_TPR_TEMP_PERIOD(x) ((GENMASK(19, 0) & (x)) << 12)
+
#define SUN4I_GPADC_CTRL3 0x0c
#define SUN4I_GPADC_CTRL3_FILTER_EN BIT(2)
@@ -84,6 +90,9 @@
#define SUN4I_GPADC_TEMP_DATA 0x20
#define SUN4I_GPADC_DATA 0x24
+#define SUN50I_H6_GPADC_CTRL3 0x30
+#define SUN50I_H6_GPADC_TEMP_DATA 0xc0
+
#define SUN4I_GPADC_IRQ_FIFO_DATA 0
#define SUN4I_GPADC_IRQ_TEMP_DATA 1
--
2.17.1
next prev parent reply other threads:[~2019-05-03 7:28 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-03 7:28 [PATCH 0/7] Add support for H6 thermal sensor Yangtao Li
2019-05-03 7:28 ` [PATCH 1/7] iio: adc: sun4i-gpadc: rework for support multiple " Yangtao Li
2019-05-05 15:22 ` Jonathan Cameron
2019-05-06 12:28 ` Maxime Ripard
2019-05-06 16:52 ` Icenowy Zheng
2019-05-06 17:08 ` Frank Lee
2019-05-06 17:55 ` Ondřej Jirman
2019-05-07 13:59 ` Maxime Ripard
2019-05-03 7:28 ` [PATCH 2/7] iio: adc: sun4i-gpadc: introduce temp_data in gpadc_data Yangtao Li
2019-05-03 7:28 ` [PATCH 3/7] iio: adc: sun4i-gpadc: introduce gpadc_enable and gpadc_disable " Yangtao Li
2019-05-03 7:28 ` [PATCH 4/7] iio: adc: sun4i-gpadc-iio: support clocks and reset Yangtao Li
2019-05-03 7:28 ` [PATCH 5/7] dt-bindings: mfd: Add H6 GPADC binding Yangtao Li
2019-05-08 11:44 ` Lee Jones
2019-05-03 7:28 ` Yangtao Li [this message]
2019-05-05 15:25 ` [PATCH 6/7] iio: adc: sun4i-gpadc-iio: add support for H6 thermal sensor Jonathan Cameron
2019-05-08 11:45 ` Lee Jones
2019-05-03 7:28 ` [PATCH 7/7] iio: adc: sun4i-gpadc-iio convert to SPDX license tags Yangtao Li
2019-05-03 9:18 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190503072813.2719-7-tiny.windzz@gmail.com \
--to=tiny.windzz@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).