From: Jonathan Cameron <jic23@kernel.org>
To: Yangtao Li <tiny.windzz@gmail.com>
Cc: lee.jones@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com,
maxime.ripard@bootlin.com, wens@csie.org, knaack.h@gmx.de,
lars@metafoo.de, pmeerw@pmeerw.net, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org
Subject: Re: [PATCH 6/7] iio: adc: sun4i-gpadc-iio: add support for H6 thermal sensor
Date: Sun, 5 May 2019 16:25:46 +0100 [thread overview]
Message-ID: <20190505162546.634bae93@archlinux> (raw)
In-Reply-To: <20190503072813.2719-7-tiny.windzz@gmail.com>
On Fri, 3 May 2019 03:28:12 -0400
Yangtao Li <tiny.windzz@gmail.com> wrote:
> This patch adds support for the H6 ths sensor.
>
> TODO: calibrate thermal sensor by using information from sid.
>
> Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
This and the patches before it that I haven't comment on look fine to me.
thanks,
Jonathan
> ---
> drivers/iio/adc/sun4i-gpadc-iio.c | 65 +++++++++++++++++++++++++++++++
> include/linux/mfd/sun4i-gpadc.h | 9 +++++
> 2 files changed, 74 insertions(+)
>
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index f24eb76d65c0..9b6fc592f54c 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -120,6 +120,20 @@ static const struct gpadc_data sun8i_a33_gpadc_data = {
> .temp_data_base = SUN4I_GPADC_TEMP_DATA,
> };
>
> +static int sun50i_gpadc_disable(struct sun4i_gpadc_iio *info);
> +static int sun50i_gpadc_enable(struct sun4i_gpadc_iio *info);
> +
> +static const struct gpadc_data sun50i_h6_gpadc_data = {
> + .temp_offset = -2809,
> + .temp_scale = -67,
> + .has_bus_clk = true,
> + .has_bus_rst = true,
> + .gpadc_enable = sun50i_gpadc_enable,
> + .gpadc_disable = sun50i_gpadc_disable,
> + .sensor_count = 2,
> + .temp_data_base = SUN50I_H6_GPADC_TEMP_DATA,
> +};
> +
> struct sun4i_sensor_tzd {
> struct sun4i_gpadc_iio *info;
> struct thermal_zone_device *tzd;
> @@ -452,6 +466,53 @@ static int sun4i_gpadc_enable(struct sun4i_gpadc_iio *info)
> return 0;
> }
>
> +static int sun50i_gpadc_enable(struct sun4i_gpadc_iio *info)
> +{
> + int ret, val;
> +
> + ret = reset_control_deassert(info->reset);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(info->bus_clk);
> + if (ret)
> + goto assert_reset;
> +
> + /*
> + * clkin = 24MHz
> + * T acquire = clkin / (SUN50I_GPADC_CTRL0_T_ACQ + 1)
> + * = 20us
> + */
> + regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
> + SUN50I_GPADC_CTRL0_T_ACQ(479));
> + /* average over 4 samples */
> + regmap_write(info->regmap, SUN50I_H6_GPADC_CTRL3,
> + SUN4I_GPADC_CTRL3_FILTER_EN |
> + SUN4I_GPADC_CTRL3_FILTER_TYPE(1));
> + /* period = (SUN50I_GPADC_TPR_TEMP_PERIOD + 1) * 4096 / clkin; ~10ms */
> + regmap_write(info->regmap, SUN50I_GPADC_TPR,
> + SUN50I_GPADC_TPR_TEMP_PERIOD(58));
> + /* TODO: calibrate ths */
> + /* enable sensor */
> + val = GENMASK(info->data->sensor_count - 1, 0);
> + regmap_write(info->regmap, SUN4I_GPADC_CTRL1, val);
> +
> + return 0;
> +
> +assert_reset:
> + reset_control_assert(info->reset);
> +
> + return ret;
> +}
> +
> +static int sun50i_gpadc_disable(struct sun4i_gpadc_iio *info)
> +{
> + clk_disable_unprepare(info->bus_clk);
> + reset_control_assert(info->reset);
> +
> + return 0;
> +}
> +
> static int sun4i_gpadc_runtime_suspend(struct device *dev)
> {
> struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
> @@ -546,6 +607,10 @@ static const struct of_device_id sun4i_gpadc_of_id[] = {
> .compatible = "allwinner,sun8i-a33-ths",
> .data = &sun8i_a33_gpadc_data,
> },
> + {
> + .compatible = "allwinner,sun50i-h6-ths",
> + .data = &sun50i_h6_gpadc_data,
> + },
> { /* sentinel */ }
> };
>
> diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
> index 139872c2e0fe..f505013e9c0d 100644
> --- a/include/linux/mfd/sun4i-gpadc.h
> +++ b/include/linux/mfd/sun4i-gpadc.h
> @@ -19,6 +19,9 @@
> #define SUN4I_GPADC_CTRL0_FS_DIV(x) ((GENMASK(3, 0) & (x)) << 16)
> #define SUN4I_GPADC_CTRL0_T_ACQ(x) (GENMASK(15, 0) & (x))
>
> +/* TP_CTRL0 bits for sun50i SOCs */
> +#define SUN50I_GPADC_CTRL0_T_ACQ(x) ((GENMASK(15, 0) & (x)) << 16)
> +
> #define SUN4I_GPADC_CTRL1 0x04
>
> #define SUN4I_GPADC_CTRL1_STYLUS_UP_DEBOUNCE(x) ((GENMASK(7, 0) & (x)) << 12)
> @@ -49,6 +52,9 @@
> #define SUN4I_GPADC_CTRL2_PRE_MEA_EN BIT(24)
> #define SUN4I_GPADC_CTRL2_PRE_MEA_THRE_CNT(x) (GENMASK(23, 0) & (x))
>
> +#define SUN50I_GPADC_TPR 0x08
> +#define SUN50I_GPADC_TPR_TEMP_PERIOD(x) ((GENMASK(19, 0) & (x)) << 12)
> +
> #define SUN4I_GPADC_CTRL3 0x0c
>
> #define SUN4I_GPADC_CTRL3_FILTER_EN BIT(2)
> @@ -84,6 +90,9 @@
> #define SUN4I_GPADC_TEMP_DATA 0x20
> #define SUN4I_GPADC_DATA 0x24
>
> +#define SUN50I_H6_GPADC_CTRL3 0x30
> +#define SUN50I_H6_GPADC_TEMP_DATA 0xc0
> +
> #define SUN4I_GPADC_IRQ_FIFO_DATA 0
> #define SUN4I_GPADC_IRQ_TEMP_DATA 1
>
next prev parent reply other threads:[~2019-05-05 15:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-03 7:28 [PATCH 0/7] Add support for H6 thermal sensor Yangtao Li
2019-05-03 7:28 ` [PATCH 1/7] iio: adc: sun4i-gpadc: rework for support multiple " Yangtao Li
2019-05-05 15:22 ` Jonathan Cameron
2019-05-06 12:28 ` Maxime Ripard
2019-05-06 16:52 ` Icenowy Zheng
2019-05-06 17:08 ` Frank Lee
2019-05-06 17:55 ` Ondřej Jirman
2019-05-07 13:59 ` Maxime Ripard
2019-05-03 7:28 ` [PATCH 2/7] iio: adc: sun4i-gpadc: introduce temp_data in gpadc_data Yangtao Li
2019-05-03 7:28 ` [PATCH 3/7] iio: adc: sun4i-gpadc: introduce gpadc_enable and gpadc_disable " Yangtao Li
2019-05-03 7:28 ` [PATCH 4/7] iio: adc: sun4i-gpadc-iio: support clocks and reset Yangtao Li
2019-05-03 7:28 ` [PATCH 5/7] dt-bindings: mfd: Add H6 GPADC binding Yangtao Li
2019-05-08 11:44 ` Lee Jones
2019-05-03 7:28 ` [PATCH 6/7] iio: adc: sun4i-gpadc-iio: add support for H6 thermal sensor Yangtao Li
2019-05-05 15:25 ` Jonathan Cameron [this message]
2019-05-08 11:45 ` Lee Jones
2019-05-03 7:28 ` [PATCH 7/7] iio: adc: sun4i-gpadc-iio convert to SPDX license tags Yangtao Li
2019-05-03 9:18 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190505162546.634bae93@archlinux \
--to=jic23@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=tiny.windzz@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).