devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thierry Reding <thierry.reding@gmail.com>
To: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Cc: bhelgaas@google.com, robh+dt@kernel.org, mark.rutland@arm.com,
	jonathanh@nvidia.com, lorenzo.pieralisi@arm.com,
	vidyas@nvidia.com, linux-tegra@vger.kernel.org,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH V2 05/28] PCI: tegra: Fix PCIe host power up sequence
Date: Thu, 9 May 2019 16:14:38 +0200	[thread overview]
Message-ID: <20190509141438.GE8907@ulmo> (raw)
In-Reply-To: <20190423092825.759-6-mmaddireddy@nvidia.com>

[-- Attachment #1: Type: text/plain, Size: 5477 bytes --]

On Tue, Apr 23, 2019 at 02:58:02PM +0530, Manikanta Maddireddy wrote:
> PCIe host power up sequence involves programming AFI(AXI to FPCI bridge)
> registers first and then PCIe registers. Otherwise AFI register settings
> may not latch to PCIe IP.
> 
> PCIe root port starts LTSSM as soon as PCIe xrst is deasserted.
> So deassert PCIe xrst after programming PCIe registers.
> 
> Modify PCIe power up sequence as follows,
>  - Power ungate PCIe partition
>  - Enable AFI clock
>  - Deassert AFI reset
>  - Program AFI registers
>  - Enable PCIe clock
>  - Deassert PCIe reset
>  - Program PCIe PHY
>  - Program PCIe pad control registers
>  - Program PCIe root port registers
>  - Deassert PCIe xrst to start LTSSM
> 
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> ---
> V2: Error cleanup changes are moved to new patch and only sequence
> correction is done in this patch.
> 
>  drivers/pci/controller/pci-tegra.c | 51 +++++++++++++++++-------------
>  1 file changed, 29 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
> index 8c0ad038699d..ed0cfd355b28 100644
> --- a/drivers/pci/controller/pci-tegra.c
> +++ b/drivers/pci/controller/pci-tegra.c
> @@ -949,9 +949,6 @@ static void tegra_pcie_enable_controller(struct tegra_pcie *pcie)
>  		afi_writel(pcie, value, AFI_FUSE);
>  	}
>  
> -	/* take the PCIe interface module out of reset */
> -	reset_control_deassert(pcie->pcie_xrst);
> -
>  	/* finally enable PCIe */
>  	value = afi_readl(pcie, AFI_CONFIGURATION);
>  	value |= AFI_CONFIGURATION_EN_FPCI;
> @@ -981,13 +978,11 @@ static void tegra_pcie_power_off(struct tegra_pcie *pcie)
>  	int err;
>  
>  	reset_control_assert(pcie->afi_rst);
> -	reset_control_assert(pcie->pex_rst);
>  
>  	clk_disable_unprepare(pcie->pll_e);
>  	if (soc->has_cml_clk)
>  		clk_disable_unprepare(pcie->cml_clk);
>  	clk_disable_unprepare(pcie->afi_clk);
> -	clk_disable_unprepare(pcie->pex_clk);
>  
>  	if (!dev->pm_domain)
>  		tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
> @@ -1015,25 +1010,19 @@ static int tegra_pcie_power_on(struct tegra_pcie *pcie)
>  	if (err < 0)
>  		dev_err(dev, "failed to enable regulators: %d\n", err);
>  
> -	if (dev->pm_domain) {
> -		err = clk_prepare_enable(pcie->pex_clk);
> +	if (!dev->pm_domain) {
> +		err = tegra_powergate_power_on(TEGRA_POWERGATE_PCIE);
>  		if (err) {
> -			dev_err(dev, "failed to enable PEX clock: %d\n", err);
> +			dev_err(dev, "failed to power ungate: %d\n", err);
>  			goto regulator_disable;
>  		}
> -		reset_control_deassert(pcie->pex_rst);
> -	} else {
> -		err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE,
> -							pcie->pex_clk,
> -							pcie->pex_rst);
> +		err = tegra_powergate_remove_clamping(TEGRA_POWERGATE_PCIE);
>  		if (err) {
> -			dev_err(dev, "powerup sequence failed: %d\n", err);
> -			goto regulator_disable;
> +			dev_err(dev, "failed to remove clamp: %d\n", err);
> +			goto powergate;
>  		}
>  	}
>  
> -	reset_control_deassert(pcie->afi_rst);
> -
>  	err = clk_prepare_enable(pcie->afi_clk);
>  	if (err < 0) {
>  		dev_err(dev, "failed to enable AFI clock: %d\n", err);
> @@ -1054,6 +1043,8 @@ static int tegra_pcie_power_on(struct tegra_pcie *pcie)
>  		goto disable_cml_clk;
>  	}
>  
> +	reset_control_deassert(pcie->afi_rst);
> +
>  	return 0;
>  
>  disable_cml_clk:
> @@ -1062,9 +1053,6 @@ static int tegra_pcie_power_on(struct tegra_pcie *pcie)
>  disable_afi_clk:
>  	clk_disable_unprepare(pcie->afi_clk);
>  powergate:
> -	reset_control_assert(pcie->afi_rst);
> -	reset_control_assert(pcie->pex_rst);
> -	clk_disable_unprepare(pcie->pex_clk);
>  	if (!dev->pm_domain)
>  		tegra_powergate_power_off(TEGRA_POWERGATE_PCIE);
>  regulator_disable:
> @@ -2114,7 +2102,12 @@ static void tegra_pcie_enable_ports(struct tegra_pcie *pcie)
>  			 port->index, port->lanes);
>  
>  		tegra_pcie_port_enable(port);
> +	}
>  
> +	/* Start LTSSM from Tegra side */
> +	reset_control_deassert(pcie->pcie_xrst);
> +
> +	list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
>  		if (tegra_pcie_port_check_link(port))
>  			continue;
>  
> @@ -2129,6 +2122,8 @@ static void tegra_pcie_disable_ports(struct tegra_pcie *pcie)
>  {
>  	struct tegra_pcie_port *port, *tmp;
>  
> +	reset_control_assert(pcie->pcie_xrst);
> +
>  	list_for_each_entry_safe(port, tmp, &pcie->ports, list)
>  		tegra_pcie_port_disable(port);
>  }
> @@ -2490,10 +2485,12 @@ static int __maybe_unused tegra_pcie_pm_suspend(struct device *dev)
>  			dev_err(dev, "failed to power off PHY(s): %d\n", err);
>  	}
>  
> +	reset_control_assert(pcie->pex_rst);
> +	clk_disable_unprepare(pcie->pex_clk);
> +
>  	if (IS_ENABLED(CONFIG_PCI_MSI))
>  		tegra_pcie_disable_msi(pcie);
>  
> -	reset_control_assert(pcie->pcie_xrst);
>  	tegra_pcie_power_off(pcie);
>  
>  	return 0;
> @@ -2515,11 +2512,18 @@ static int __maybe_unused tegra_pcie_pm_resume(struct device *dev)
>  	if (IS_ENABLED(CONFIG_PCI_MSI))
>  		tegra_pcie_enable_msi(pcie);
>  
> +	err = clk_prepare_enable(pcie->pex_clk);
> +	if (err) {
> +		dev_err(dev, "failed to enable PEX clock: %d\n", err);
> +		goto poweroff;
> +	}
> +	reset_control_deassert(pcie->pex_rst);

Can you use a blank line after block statements for better readability?
With that:

Acked-by: Thierry Reding <treding@nvidia.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2019-05-09 14:14 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-23  9:27 [PATCH V2 00/28] Enable Tegra PCIe root port features Manikanta Maddireddy
2019-04-23  9:27 ` [PATCH V2 01/28] soc/tegra: pmc: Export tegra_powergate_power_on() Manikanta Maddireddy
2019-05-09 14:02   ` Thierry Reding
2019-04-23  9:27 ` [PATCH V2 02/28] PCI: tegra: Handle failure cases in tegra_pcie_power_on() Manikanta Maddireddy
2019-05-09 14:04   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 03/28] PCI: tegra: Rearrange Tegra PCIe driver functions Manikanta Maddireddy
2019-05-09 14:05   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 04/28] PCI: tegra: Disable PCIe interrupts in runtime suspend Manikanta Maddireddy
2019-05-09 14:10   ` Thierry Reding
2019-05-09 15:57     ` Manikanta Maddireddy
2019-04-23  9:28 ` [PATCH V2 05/28] PCI: tegra: Fix PCIe host power up sequence Manikanta Maddireddy
2019-05-09 14:14   ` Thierry Reding [this message]
2019-04-23  9:28 ` [PATCH V2 06/28] PCI: tegra: Add PCIe Gen2 link speed support Manikanta Maddireddy
2019-05-09 14:17   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 07/28] PCI: tegra: Advertise PCIe Advanced Error Reporting (AER) capability Manikanta Maddireddy
2019-05-09 14:17   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 08/28] PCI: tegra: Program UPHY electrical settings for Tegra210 Manikanta Maddireddy
2019-05-09 14:18   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 09/28] PCI: tegra: Enable opportunistic UpdateFC and ACK Manikanta Maddireddy
2019-04-23  9:28 ` [PATCH V2 10/28] PCI: tegra: Disable AFI dynamic clock gating Manikanta Maddireddy
2019-04-23  9:28 ` [PATCH V2 11/28] PCI: tegra: Process pending DLL transactions before entering L1 or L2 Manikanta Maddireddy
2019-04-23  9:28 ` [PATCH V2 12/28] PCI: tegra: Enable PCIe xclk clock clamping Manikanta Maddireddy
2019-05-09 14:20   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 13/28] PCI: tegra: Increase the deskew retry time Manikanta Maddireddy
2019-05-09 14:20   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 14/28] PCI: tegra: Add SW fixup for RAW violations Manikanta Maddireddy
2019-05-09 14:21   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 15/28] PCI: tegra: Update flow control timer frequency in Tegra210 Manikanta Maddireddy
2019-05-09 14:22   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 16/28] PCI: tegra: Set target speed as Gen1 before starting LTSSM Manikanta Maddireddy
2019-05-09 14:23   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 17/28] PCI: tegra: Fix PLLE power down issue due to CLKREQ# signal Manikanta Maddireddy
2019-05-09 14:24   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 18/28] PCI: tegra: Program AFI_CACHE* registers only for Tegra20 Manikanta Maddireddy
2019-04-26 15:32   ` Thierry Reding
2019-04-29  9:30     ` Manikanta Maddireddy
2019-05-09 14:25       ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 19/28] PCI: tegra: Change PRSNT_SENSE irq log to debug Manikanta Maddireddy
2019-05-09 14:27   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 20/28] PCI: tegra: Use legacy irq for port service drivers Manikanta Maddireddy
2019-05-09 14:29   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 21/28] PCI: tegra: Add AFI_PEX2_CTRL reg offset as part of soc struct Manikanta Maddireddy
2019-04-23  9:28 ` [PATCH V2 22/28] PCI: tegra: Access endpoint config only if PCIe link is up Manikanta Maddireddy
2019-04-23 20:24   ` Bjorn Helgaas
2019-04-24  3:51     ` Manikanta Maddireddy
2019-05-09 14:34       ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 23/28] dt-bindings: pci: tegra: Document PCIe DPD pinctrl optional prop Manikanta Maddireddy
2019-05-01 19:52   ` Rob Herring
2019-05-09 14:34   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 24/28] arm64: tegra: Add PEX DPD states as pinctrl properties Manikanta Maddireddy
2019-05-09 14:38   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 25/28] PCI: tegra: Put PEX CLK & BIAS pads in DPD mode Manikanta Maddireddy
2019-05-09 14:35   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 26/28] dt-bindings: pci: tegra: Document reset-gpio optional prop Manikanta Maddireddy
2019-05-01 19:58   ` Rob Herring
2019-05-09 14:37   ` Thierry Reding
2019-05-09 14:37     ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 27/28] PCI: tegra: Add support for GPIO based PCIe reset Manikanta Maddireddy
2019-05-09 14:45   ` Thierry Reding
2019-04-23  9:28 ` [PATCH V2 28/28] PCI: tegra: Change link retry log level to info Manikanta Maddireddy
2019-05-09 14:47   ` Thierry Reding
2019-04-26 13:22 ` [PATCH V2 00/28] Enable Tegra PCIe root port features Thierry Reding
2019-05-01 11:13   ` Lorenzo Pieralisi
2019-05-01 11:43     ` Manikanta Maddireddy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190509141438.GE8907@ulmo \
    --to=thierry.reding@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mmaddireddy@nvidia.com \
    --cc=robh+dt@kernel.org \
    --cc=vidyas@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).