From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Chris Brandt Subject: [PATCH v2 06/15] dt-bindings: rcar-gen3-phy-usb2: Document dr_mode Date: Thu, 9 May 2019 15:11:33 -0500 Message-ID: <20190509201142.10543-7-chris.brandt@renesas.com> In-Reply-To: <20190509201142.10543-1-chris.brandt@renesas.com> References: <20190509201142.10543-1-chris.brandt@renesas.com> MIME-Version: 1.0 Content-Type: text/plain To: Rob Herring , Mark Rutland , Greg Kroah-Hartman , Simon Horman , Yoshihiro Shimoda Cc: Geert Uytterhoeven , Sergei Shtylyov , linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Chris List-ID: Document the optional dr_mode property Signed-off-by: Chris Brandt --- Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index 79d8360d92e5..d2bbfe577345 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -48,6 +48,9 @@ channel as USB OTG: regulator will be managed during the PHY power on/off sequence. - renesas,no-otg-pins: boolean, specify when a board does not provide proper otg pins. +- dr_mode: string, indicates the working mode for the PHY. Can be "host", + "peripheral", or "otg". Should be set if otg controller is not used. + Example (R-Car H3): -- 2.16.1