From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kuldeep Singh Subject: [PATCH] arm64: dts: ls1088a: Add QSPI support Date: Thu, 16 May 2019 11:47:07 +0000 Message-ID: <20190516114807.30817-3-kuldeep.singh@nxp.com> References: <20190516114807.30817-1-kuldeep.singh@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190516114807.30817-1-kuldeep.singh@nxp.com> Content-Language: en-US List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-mtd" Errors-To: linux-mtd-bounces+gldm-linux-mtd-36=gmane.org@lists.infradead.org To: "shawnguo@kernel.org" , "devicetree@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , "linux-mtd@lists.infradead.org" Cc: Kuldeep Singh , "broonie@kernel.org" , Ashish Kumar , "bbrezillon@kernel.org" List-Id: devicetree@vger.kernel.org QSPI support is added for kernel version greater than 5.0 and supports quad mode defined by TX-WIDTH = <4>, RX-WIDTH = <4> RDB/QDS has two 64MB flash from SPANSION(s25fs512s) Signed-off-by: Ashish Kumar Signed-off-by: Kuldeep Singh --- Dependency on https://patchwork.ozlabs.org/patch/1100471/ Dependency on https://patchwork.ozlabs.org/patch/1100472/ .../boot/dts/freescale/fsl-ls1088a-qds.dts | 26 +++++++++++++++++++ .../boot/dts/freescale/fsl-ls1088a-rdb.dts | 26 +++++++++++++++++++ .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 ++++++++++ 3 files changed, 65 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 6f48d21b97c0..f01f7fca9df7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -98,6 +98,32 @@ }; }; +&qspi { + status = "okay"; + + qflash0: flash@0 { + compatible = "spansion,m25p80", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + m25p,fast-read; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <0>; + }; + + qflash1: flash@1 { + compatible = "spansion,m25p80", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + m25p,fast-read; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <1>; + }; +}; + &duart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 8e925df6c01c..bdec7e996dbe 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -74,6 +74,32 @@ }; }; +&qspi { + status = "okay"; + + qflash0: flash@0 { + compatible = "spansion,m25p80", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + m25p,fast-read; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <0>; + }; + + qflash1: flash@1 { + compatible = "spansion,m25p80", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + m25p,fast-read; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + reg = <1>; + }; +}; + &duart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 661137ffa319..96424fd9cd2e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -318,6 +318,19 @@ status = "disabled"; }; + qspi: spi@20c0000 { + status = "disabled"; + compatible = "fsl,ls2080a-qspi", "fsl,ls1088a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <0 25 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "qspi_en", "qspi"; + }; + i2c0: i2c@2000000 { compatible = "fsl,vf610-i2c"; #address-cells = <1>; -- 2.17.1 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/