* [PATCH 0/2] Add dts support for frwy-ls1046a board @ 2019-05-08 13:53 Pramod Kumar 2019-05-08 13:53 ` [PATCH 1/2] dt-bindings: arm: fsl: Add device tree binding for ls1046a-frwy board Pramod Kumar 2019-05-08 13:53 ` [PATCH 2/2] add dts file to enable support for ls1046afrwy board Pramod Kumar 0 siblings, 2 replies; 8+ messages in thread From: Pramod Kumar @ 2019-05-08 13:53 UTC (permalink / raw) To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, manivannan.sadhasivam@linaro.org, Aisheng Dong, Michal.Vokac@ysoft.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Add dts support for frwy-ls1046a which is based on ls1046a soc Pramod Kumar (2): dt-bindings: arm: fsl: Add device tree binding for ls1046a-frwy board add dts file to enable support for ls1046afrwy board. .../devicetree/bindings/arm/fsl.yaml | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/fsl-ls1046a-frwy.dts | 156 ++++++++++++++++++ 3 files changed, 158 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts -- 2.17.1 ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] dt-bindings: arm: fsl: Add device tree binding for ls1046a-frwy board 2019-05-08 13:53 [PATCH 0/2] Add dts support for frwy-ls1046a board Pramod Kumar @ 2019-05-08 13:53 ` Pramod Kumar 2019-05-08 19:36 ` Rob Herring 2019-05-17 2:32 ` Shawn Guo 2019-05-08 13:53 ` [PATCH 2/2] add dts file to enable support for ls1046afrwy board Pramod Kumar 1 sibling, 2 replies; 8+ messages in thread From: Pramod Kumar @ 2019-05-08 13:53 UTC (permalink / raw) To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, manivannan.sadhasivam@linaro.org, Aisheng Dong, Michal.Vokac@ysoft.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Vabhav Sharma Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> --- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 7e2cd6ad26bd..873999bf4a43 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -205,6 +205,7 @@ properties: - enum: - fsl,ls1046a-qds - fsl,ls1046a-rdb + - fsl,ls1046a-frwy - const: fsl,ls1046a - description: LS1088A based Boards -- 2.17.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: fsl: Add device tree binding for ls1046a-frwy board 2019-05-08 13:53 ` [PATCH 1/2] dt-bindings: arm: fsl: Add device tree binding for ls1046a-frwy board Pramod Kumar @ 2019-05-08 19:36 ` Rob Herring 2019-05-17 2:32 ` Shawn Guo 1 sibling, 0 replies; 8+ messages in thread From: Rob Herring @ 2019-05-08 19:36 UTC (permalink / raw) To: Pramod Kumar Cc: mark.rutland@arm.com, shawnguo@kernel.org, manivannan.sadhasivam@linaro.org, Aisheng Dong, Michal.Vokac@ysoft.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Vabhav Sharma On Wed, May 8, 2019 at 8:53 AM Pramod Kumar <pramod.kumar_1@nxp.com> wrote: > > Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC > > Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> > Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> > --- > Documentation/devicetree/bindings/arm/fsl.yaml | 1 + > 1 file changed, 1 insertion(+) Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] dt-bindings: arm: fsl: Add device tree binding for ls1046a-frwy board 2019-05-08 13:53 ` [PATCH 1/2] dt-bindings: arm: fsl: Add device tree binding for ls1046a-frwy board Pramod Kumar 2019-05-08 19:36 ` Rob Herring @ 2019-05-17 2:32 ` Shawn Guo 1 sibling, 0 replies; 8+ messages in thread From: Shawn Guo @ 2019-05-17 2:32 UTC (permalink / raw) To: Pramod Kumar Cc: robh+dt@kernel.org, mark.rutland@arm.com, manivannan.sadhasivam@linaro.org, Aisheng Dong, Michal.Vokac@ysoft.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Vabhav Sharma On Wed, May 08, 2019 at 01:53:08PM +0000, Pramod Kumar wrote: > Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC > > Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> > Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Sorry. I do not take patch from message using base64 encoding. Shawn > --- > Documentation/devicetree/bindings/arm/fsl.yaml | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml > index 7e2cd6ad26bd..873999bf4a43 100644 > --- a/Documentation/devicetree/bindings/arm/fsl.yaml > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml > @@ -205,6 +205,7 @@ properties: > - enum: > - fsl,ls1046a-qds > - fsl,ls1046a-rdb > + - fsl,ls1046a-frwy > - const: fsl,ls1046a > > - description: LS1088A based Boards > -- > 2.17.1 > ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] add dts file to enable support for ls1046afrwy board. 2019-05-08 13:53 [PATCH 0/2] Add dts support for frwy-ls1046a board Pramod Kumar 2019-05-08 13:53 ` [PATCH 1/2] dt-bindings: arm: fsl: Add device tree binding for ls1046a-frwy board Pramod Kumar @ 2019-05-08 13:53 ` Pramod Kumar 2019-05-08 14:00 ` Fabio Estevam 2019-05-17 2:35 ` Shawn Guo 1 sibling, 2 replies; 8+ messages in thread From: Pramod Kumar @ 2019-05-08 13:53 UTC (permalink / raw) To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, manivannan.sadhasivam@linaro.org, Aisheng Dong, Michal.Vokac@ysoft.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Vabhav Sharma ls1046afrwy board is based on nxp ls1046a SoC. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/fsl-ls1046a-frwy.dts | 156 ++++++++++++++++++ 2 files changed, 157 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 13604e558dc1..84ff6995b41e 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts new file mode 100644 index 000000000000..de0d19c02944 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2019 NXP. + * + */ + +/dts-v1/; + +#include "fsl-ls1046a.dtsi" + +/ { + model = "LS1046A FRWY Board"; + compatible = "fsl,ls1046a-frwy", "fsl,ls1046a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT8642SEV-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&duart2 { + status = "okay"; +}; + +&duart3 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-never-disable; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@52 { + compatible = "atmel,24c512"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + }; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NAND Flash */ + ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>; + status = "okay"; + + nand@0,0 { + compatible = "fsl,ifc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x10000>; + }; + +}; + +#include "fsl-ls1046-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy4>; + phy-connection-type = "qsgmii"; + }; + + ethernet@e8000 { + phy-handle = <&qsgmii_phy2>; + phy-connection-type = "qsgmii"; + }; + + ethernet@ea000 { + phy-handle = <&qsgmii_phy1>; + phy-connection-type = "qsgmii"; + }; + + ethernet@f2000 { + phy-handle = <&qsgmii_phy3>; + phy-connection-type = "qsgmii"; + }; + + mdio@fd000 { + qsgmii_phy1: ethernet-phy@1c { + reg = <0x1c>; + }; + + qsgmii_phy2: ethernet-phy@1d { + reg = <0x1d>; + }; + + qsgmii_phy3: ethernet-phy@1e { + reg = <0x1e>; + }; + + qsgmii_phy4: ethernet-phy@1f { + reg = <0x1f>; + }; + }; +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] add dts file to enable support for ls1046afrwy board. 2019-05-08 13:53 ` [PATCH 2/2] add dts file to enable support for ls1046afrwy board Pramod Kumar @ 2019-05-08 14:00 ` Fabio Estevam 2019-05-10 12:49 ` [EXT] " Vabhav Sharma 2019-05-17 2:35 ` Shawn Guo 1 sibling, 1 reply; 8+ messages in thread From: Fabio Estevam @ 2019-05-08 14:00 UTC (permalink / raw) To: Pramod Kumar Cc: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, manivannan.sadhasivam@linaro.org, Aisheng Dong, Michal.Vokac@ysoft.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Vabhav Sharma Hi Pramod, On Wed, May 8, 2019 at 10:56 AM Pramod Kumar <pramod.kumar_1@nxp.com> wrote: > +&fman0 { > + ethernet@e0000 { You have passed @e0000 without a corresponfing reg entry. This causes dtc build warnings with W=1. Please make sure you don't introduce new W=1 warnings. ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [EXT] Re: [PATCH 2/2] add dts file to enable support for ls1046afrwy board. 2019-05-08 14:00 ` Fabio Estevam @ 2019-05-10 12:49 ` Vabhav Sharma 0 siblings, 0 replies; 8+ messages in thread From: Vabhav Sharma @ 2019-05-10 12:49 UTC (permalink / raw) To: Fabio Estevam, Pramod Kumar Cc: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, manivannan.sadhasivam@linaro.org, Aisheng Dong, Michal.Vokac@ysoft.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Hi Fabio, > -----Original Message----- > From: Fabio Estevam <festevam@gmail.com> > Sent: Wednesday, May 8, 2019 7:30 PM > To: Pramod Kumar <pramod.kumar_1@nxp.com> > Cc: robh+dt@kernel.org; mark.rutland@arm.com; shawnguo@kernel.org; > manivannan.sadhasivam@linaro.org; Aisheng Dong > <aisheng.dong@nxp.com>; Michal.Vokac@ysoft.com; > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Vabhav Sharma > <vabhav.sharma@nxp.com> > Subject: [EXT] Re: [PATCH 2/2] add dts file to enable support for ls1046afrwy > board. > > Caution: EXT Email > > Hi Pramod, > > On Wed, May 8, 2019 at 10:56 AM Pramod Kumar > <pramod.kumar_1@nxp.com> wrote: > > > +&fman0 { > > + ethernet@e0000 { > > You have passed @e0000 without a corresponfing reg entry. > > This causes dtc build warnings with W=1. > > Please make sure you don't introduce new W=1 warnings. ethernet node is included with fsl-ls1046-post.dtsi file and no warning is introduced. node content can be found in arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi: ethernet@e0000 { cell-index = <0>; compatible = "fsl,fman-memac"; reg = <0xe0000 0x1000>; fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; ptp-timer = <&ptp_timer0>; pcsphy-handle = <&pcsphy0>; }; Regards, Vabhav ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] add dts file to enable support for ls1046afrwy board. 2019-05-08 13:53 ` [PATCH 2/2] add dts file to enable support for ls1046afrwy board Pramod Kumar 2019-05-08 14:00 ` Fabio Estevam @ 2019-05-17 2:35 ` Shawn Guo 1 sibling, 0 replies; 8+ messages in thread From: Shawn Guo @ 2019-05-17 2:35 UTC (permalink / raw) To: Pramod Kumar Cc: robh+dt@kernel.org, mark.rutland@arm.com, manivannan.sadhasivam@linaro.org, Aisheng Dong, Michal.Vokac@ysoft.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Vabhav Sharma On Wed, May 08, 2019 at 01:53:10PM +0000, Pramod Kumar wrote: > ls1046afrwy board is based on nxp ls1046a SoC. > > Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> > Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Please have a subject prefix like 'arm64: dts: ...' Shawn > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/fsl-ls1046a-frwy.dts | 156 ++++++++++++++++++ > 2 files changed, 157 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 13604e558dc1..84ff6995b41e 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > new file mode 100644 > index 000000000000..de0d19c02944 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > @@ -0,0 +1,156 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Device Tree Include file for Freescale Layerscape-1046A family SoC. > + * > + * Copyright 2019 NXP. > + * > + */ > + > +/dts-v1/; > + > +#include "fsl-ls1046a.dtsi" > + > +/ { > + model = "LS1046A FRWY Board"; > + compatible = "fsl,ls1046a-frwy", "fsl,ls1046a"; > + > + aliases { > + serial0 = &duart0; > + serial1 = &duart1; > + serial2 = &duart2; > + serial3 = &duart3; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + sb_3v3: regulator-sb3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "LT8642SEV-3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > +}; > + > +&duart0 { > + status = "okay"; > +}; > + > +&duart1 { > + status = "okay"; > +}; > + > +&duart2 { > + status = "okay"; > +}; > + > +&duart3 { > + status = "okay"; > +}; > + > +&i2c0 { > + status = "okay"; > + > + i2c-mux@77 { > + compatible = "nxp,pca9546"; > + reg = <0x77>; > + #address-cells = <1>; > + #size-cells = <0>; > + i2c-mux-never-disable; > + > + i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + eeprom@52 { > + compatible = "atmel,24c512"; > + reg = <0x52>; > + }; > + > + eeprom@53 { > + compatible = "atmel,24c512"; > + reg = <0x53>; > + }; > + > + power-monitor@40 { > + compatible = "ti,ina220"; > + reg = <0x40>; > + shunt-resistor = <1000>; > + }; > + > + rtc@51 { > + compatible = "nxp,pcf2129"; > + reg = <0x51>; > + }; > + > + temperature-sensor@4c { > + compatible = "nxp,sa56004"; > + reg = <0x4c>; > + vcc-supply = <&sb_3v3>; > + }; > + > + }; > + }; > +}; > + > +&ifc { > + #address-cells = <2>; > + #size-cells = <1>; > + /* NAND Flash */ > + ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>; > + status = "okay"; > + > + nand@0,0 { > + compatible = "fsl,ifc-nand"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x0 0x0 0x10000>; > + }; > + > +}; > + > +#include "fsl-ls1046-post.dtsi" > + > +&fman0 { > + ethernet@e0000 { > + phy-handle = <&qsgmii_phy4>; > + phy-connection-type = "qsgmii"; > + }; > + > + ethernet@e8000 { > + phy-handle = <&qsgmii_phy2>; > + phy-connection-type = "qsgmii"; > + }; > + > + ethernet@ea000 { > + phy-handle = <&qsgmii_phy1>; > + phy-connection-type = "qsgmii"; > + }; > + > + ethernet@f2000 { > + phy-handle = <&qsgmii_phy3>; > + phy-connection-type = "qsgmii"; > + }; > + > + mdio@fd000 { > + qsgmii_phy1: ethernet-phy@1c { > + reg = <0x1c>; > + }; > + > + qsgmii_phy2: ethernet-phy@1d { > + reg = <0x1d>; > + }; > + > + qsgmii_phy3: ethernet-phy@1e { > + reg = <0x1e>; > + }; > + > + qsgmii_phy4: ethernet-phy@1f { > + reg = <0x1f>; > + }; > + }; > +}; > -- > 2.17.1 > ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-05-17 2:35 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-05-08 13:53 [PATCH 0/2] Add dts support for frwy-ls1046a board Pramod Kumar 2019-05-08 13:53 ` [PATCH 1/2] dt-bindings: arm: fsl: Add device tree binding for ls1046a-frwy board Pramod Kumar 2019-05-08 19:36 ` Rob Herring 2019-05-17 2:32 ` Shawn Guo 2019-05-08 13:53 ` [PATCH 2/2] add dts file to enable support for ls1046afrwy board Pramod Kumar 2019-05-08 14:00 ` Fabio Estevam 2019-05-10 12:49 ` [EXT] " Vabhav Sharma 2019-05-17 2:35 ` Shawn Guo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).