From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Mon, 20 May 2019 10:16:40 +0800 From: Shawn Guo Subject: Re: [PATCH 00/17] Add Support for Kontron SMARC-sAMX6i Message-ID: <20190520021639.GG15856@dragon> References: <20190509155834.22838-1-m.felsch@pengutronix.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20190509155834.22838-1-m.felsch@pengutronix.de> To: Marco Felsch Cc: robh+dt@kernel.org, linux-imx@nxp.com, Stefan.Nickl@kontron.com, Gilles.Buloz@kontron.com, Michael.Brunner@kontron.com, thomas.schaefer@kontron.com, frieder.schrempf@kontron.de, kernel@pengutronix.de, devicetree@vger.kernel.org List-ID: On Thu, May 09, 2019 at 05:58:17PM +0200, Marco Felsch wrote: > Hi, > > this series adds the Kontron SoM 'SMARC-sAMX6i' which is compatible to > the SMARC 1.1 standard [1]. Most of the muxing can be done within the > SoM dtsi since the standard defines a unique SoM hardware interface. > > This series is based on Priit Laes initial commit [2] which adds the > initial support. I addressed the comments and changed the copyright > since there where a lot of fixes. > > Testers are welcome :) since I used a custome baseboard which doesn't > use all of the interfaces. > > [1] https://sget.org/standards/smarc > [2] https://lore.kernel.org/patchwork/patch/762261/ > > Marco Felsch (14): > dt-bindings: add Kontron vendor prefix > ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC SDIO interface > ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC LCD interface > ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC Management pins > ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC GPIO interface > ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC HDMI interface > ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC CSI Camera interface > ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC I2S interface > ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC SPI1 interface > ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC Watchdog > ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC module eeprom > ARCH: arm: dts: imx6qdl-kontron-samx6i: add power management support > ARCH: arm: dts: imx6q-kontron-samx6i: add Kontron SMARC Quad/Dual SoM > ARCH: arm: dts: imx6dl-kontron-samx6i: add Kontron SMARC > Dual-Lite/Solo SoM > > Michael Grzeschik (2): > ARCH: arm: dts: imx6qdl-kontron-samx6i: add SMARC SPI0 interface > ARCH: arm: dts: imx6qdl-kontron-samx6i: add boot spi-nor > > Priit Laes (1): > ARCH: arm: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron > SMARC-sAMX6i module Do we really need so many patches for adding a single board support, or can we squash some of them? Shawn > > .../devicetree/bindings/vendor-prefixes.txt | 1 + > arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi | 12 + > arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi | 36 + > arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi | 812 ++++++++++++++++++ > 4 files changed, 861 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi > create mode 100644 arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi > create mode 100644 arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi > > -- > 2.20.1 >