From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Colin King <colin.king@canonical.com>
Cc: Andy Gross <agross@kernel.org>,
David Brown <david.brown@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, kernel-janitors@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dt-bindings: pinctrl: fix spelling mistakes in pinctl documentation
Date: Sat, 25 May 2019 22:45:03 -0700 [thread overview]
Message-ID: <20190526054503.GJ2085@tuxbook-pro> (raw)
In-Reply-To: <20190525204228.8546-1-colin.king@canonical.com>
On Sat 25 May 13:42 PDT 2019, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> The spelling of configured is incorrect in the documentation. Fix it.
>
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Thanks,
Bjorn
> ---
> .../devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt | 6 +++---
> .../devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt | 6 +++---
> 11 files changed, 33 insertions(+), 33 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
> index 68e93d5b7ede..c9782397ff14 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
> @@ -122,17 +122,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
> index 6dd72f8599e9..7b151894f5a0 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
> @@ -118,17 +118,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt
> index 86ecdcfc4fb8..d46973968873 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt
> @@ -97,17 +97,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
> index 195a7a0ef0cc..3354a63296d9 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
> @@ -130,17 +130,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
> index 5034eb6653c7..a7dd213c77c6 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
> @@ -124,17 +124,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
> index f15443f6e78e..da52df6273bc 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt
> @@ -128,17 +128,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
> index fa97f609fe45..a56cb882830c 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt
> @@ -149,17 +149,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
> index e70c79bbbc5b..00174f08ba1d 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt
> @@ -135,17 +135,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt
> index 2b8f77762edc..a50e74684195 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt
> @@ -150,17 +150,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
> index 769ca83bb40d..be034d329e10 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt
> @@ -142,17 +142,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
> index 665aadb5ea28..321bdb9be0d2 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt
> @@ -118,17 +118,17 @@ to specify in a pin configuration subnode:
> - bias-disable:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as no pull.
> + Definition: The specified pins should be configured as no pull.
>
> - bias-pull-down:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull down.
> + Definition: The specified pins should be configured as pull down.
>
> - bias-pull-up:
> Usage: optional
> Value type: <none>
> - Definition: The specified pins should be configued as pull up.
> + Definition: The specified pins should be configured as pull up.
>
> - output-high:
> Usage: optional
> --
> 2.20.1
>
next prev parent reply other threads:[~2019-05-26 5:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-25 20:42 [PATCH] dt-bindings: pinctrl: fix spelling mistakes in pinctl documentation Colin King
2019-05-26 5:45 ` Bjorn Andersson [this message]
2019-05-27 9:10 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190526054503.GJ2085@tuxbook-pro \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=colin.king@canonical.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel-janitors@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox