[PATCH v3 0/3] arm64: dts: nxp: add ls1046a frwy board support

[PATCH v3 0/3] arm64: dts: nxp: add ls1046a frwy board support

[Pramod Kumar]

Changes for v3:
- Remove undocumented propert i2c-mux-never-disable
- Sort nodes at i2c mux in unit-address
- Remove Unnecessary newline

Changes for v2:
- Modified comit message
- Add dts entry for qspi nor flash

Pramod Kumar (3):
  dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board
  arm64: dts: nxp: add ls1046a-frwy board support
  arm64: dts: frwy-ls1046a: add support for micron nor flash

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/fsl-ls1046a-frwy.dts   | 172 ++++++++++++++++++
 3 files changed, 174 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts

-- 
2.17.1

[PATCH 1/3] dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board

[Pramod Kumar]

Add "fsl,ls1046a-frwy" bindings for ls1046afrwy board based on ls1046a SoC

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 407138ebc0d0..09ff1999ce96 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -241,6 +241,7 @@ properties:
           - enum:
               - fsl,ls1046a-qds
               - fsl,ls1046a-rdb
+              - fsl,ls1046a-frwy
           - const: fsl,ls1046a
 
       - description: LS1088A based Boards
-- 
2.17.1

[PATCH 2/3] arm64: dts: nxp: add ls1046a-frwy board support

[Pramod Kumar]

ls1046afrwy board is based on nxp ls1046a SoC.
Board support's 4GB ddr memory, i2c, microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/fsl-ls1046a-frwy.dts   | 156 ++++++++++++++++++
 2 files changed, 157 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 0bd122f60549..1211531f417c 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
new file mode 100644
index 000000000000..cda49988d8b8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2019 NXP.
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A FRWY Board";
+	compatible = "fsl,ls1046a-frwy", "fsl,ls1046a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT8642SEV-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&duart2 {
+	status = "okay";
+};
+
+&duart3 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c512";
+				reg = <0x52>;
+			};
+
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NAND Flash */
+	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x10000>;
+	};
+
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy4>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy2>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy1>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@f2000 {
+		phy-handle = <&qsgmii_phy3>;
+		phy-connection-type = "qsgmii";
+	};
+
+	mdio@fd000 {
+		qsgmii_phy1: ethernet-phy@1c {
+			reg = <0x1c>;
+		};
+
+		qsgmii_phy2: ethernet-phy@1d {
+			reg = <0x1d>;
+		};
+
+		qsgmii_phy3: ethernet-phy@1e {
+			reg = <0x1e>;
+		};
+
+		qsgmii_phy4: ethernet-phy@1f {
+			reg = <0x1f>;
+		};
+	};
+};
-- 
2.17.1

[PATCH 3/3] arm64: dts: frwy-ls1046a: add support for micron nor flash

[Pramod Kumar]

add micron nor flash support for ls1046a frwy board.

Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
---
 .../boot/dts/freescale/fsl-ls1046a-frwy.dts    | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
index cda49988d8b8..0f626c986a9a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -2,7 +2,7 @@
 /*
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
- * Copyright 2019 NXP.
+ * Copyright 2019 NXP
  *
  */
 
@@ -113,6 +113,22 @@
 
 };
 
+&qspi {
+	num-cs = <1>;
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
 #include "fsl-ls1046-post.dtsi"
 
 &fman0 {
-- 
2.17.1