From: Michael Tretter <m.tretter@pengutronix.de>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org
Cc: kernel@pengutronix.de, robh+dt@kernel.org, mchehab@kernel.org,
tfiga@chromium.org, hverkuil@xs4all.nl,
Michael Tretter <m.tretter@pengutronix.de>,
Rob Herring <robh@kernel.org>
Subject: [PATCH v8 2/5] media: dt-bindings: media: document allegro-dvt bindings
Date: Tue, 28 May 2019 19:11:17 +0200 [thread overview]
Message-ID: <20190528171120.7076-3-m.tretter@pengutronix.de> (raw)
In-Reply-To: <20190528171120.7076-1-m.tretter@pengutronix.de>
Add device-tree bindings for the Allegro DVT video IP core found on the
Xilinx ZynqMP EV family.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v7 -> v8:
none
v6 -> v7:
none
v5 -> v6:
none
v4 -> v5:
none
v3 -> v4:
none
v2 -> v3:
- rename node to video-codec
- drop interrupt-names
- fix compatible in example
- add clocks to required properties
v1 -> v2:
none
---
.../devicetree/bindings/media/allegro.txt | 43 +++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/allegro.txt
diff --git a/Documentation/devicetree/bindings/media/allegro.txt b/Documentation/devicetree/bindings/media/allegro.txt
new file mode 100644
index 000000000000..a92e2fbf26c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allegro.txt
@@ -0,0 +1,43 @@
+Device-tree bindings for the Allegro DVT video IP codecs present in the Xilinx
+ZynqMP SoC. The IP core may either be a H.264/H.265 encoder or H.264/H.265
+decoder ip core.
+
+Each actual codec engines is controlled by a microcontroller (MCU). Host
+software uses a provided mailbox interface to communicate with the MCU. The
+MCU share an interrupt.
+
+Required properties:
+ - compatible: value should be one of the following
+ "allegro,al5e-1.1", "allegro,al5e": encoder IP core
+ "allegro,al5d-1.1", "allegro,al5d": decoder IP core
+ - reg: base and length of the memory mapped register region and base and
+ length of the memory mapped sram
+ - reg-names: must include "regs" and "sram"
+ - interrupts: shared interrupt from the MCUs to the processing system
+ - clocks: must contain an entry for each entry in clock-names
+ - clock-names: must include "core_clk", "mcu_clk", "m_axi_core_aclk",
+ "m_axi_mcu_aclk", "s_axi_lite_aclk"
+
+Example:
+ al5e: video-codec@a0009000 {
+ compatible = "allegro,al5e-1.1", "allegro,al5e";
+ reg = <0 0xa0009000 0 0x1000>,
+ <0 0xa0000000 0 0x8000>;
+ reg-names = "regs", "sram";
+ interrupts = <0 96 4>;
+ clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>,
+ <&clkc 71>, <&clkc 71>, <&clkc 71>;
+ clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
+ "m_axi_mcu_aclk", "s_axi_lite_aclk"
+ };
+ al5d: video-codec@a0029000 {
+ compatible = "allegro,al5d-1.1", "allegro,al5d";
+ reg = <0 0xa0029000 0 0x1000>,
+ <0 0xa0020000 0 0x8000>;
+ reg-names = "regs", "sram";
+ interrupts = <0 96 4>;
+ clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>,
+ <&clkc 71>, <&clkc 71>, <&clkc 71>;
+ clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
+ "m_axi_mcu_aclk", "s_axi_lite_aclk"
+ };
--
2.20.1
next prev parent reply other threads:[~2019-05-28 17:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 17:11 [PATCH v8 0/5] Add ZynqMP VCU/Allegro DVT H.264 encoder driver Michael Tretter
2019-05-28 17:11 ` [PATCH v8 1/5] videobuf2-v4l2: set last_buffer_dequeued in dqbuf Michael Tretter
2019-05-28 17:11 ` Michael Tretter [this message]
2019-05-28 17:11 ` [PATCH v8 3/5] media: dt-bindings: media: Add vendor prefix for allegro Michael Tretter
2019-05-28 17:11 ` [PATCH v8 4/5] [media] allegro: add Allegro DVT video IP core driver Michael Tretter
2019-05-28 17:11 ` [PATCH v8 5/5] [media] allegro: add SPS/PPS nal unit writer Michael Tretter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190528171120.7076-3-m.tretter@pengutronix.de \
--to=m.tretter@pengutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil@xs4all.nl \
--cc=kernel@pengutronix.de \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).