From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: "Mark Rutland" <mark.rutland@arm.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Scott Branden" <sbranden@broadcom.com>,
"Ray Jui" <rjui@broadcom.com>, "Rafał Miłecki" <zajec5@gmail.com>,
"open list" <linux-kernel@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"maintainer:BROADCOM IPROC ARM ARCHITECTURE"
<bcm-kernel-feedback-list@broadcom.com>,
"Gregory Fong" <gregory.0xf0@gmail.com>,
"Hauke Mehrtens" <hauke@hauke-m.de>,
"Brian Norris" <computersforpeace@gmail.com>
Subject: [PATCH 3/7] ARM: dts: bcm-mobile: Fix most DTC W=1 warnings
Date: Tue, 28 May 2019 16:01:30 -0700 [thread overview]
Message-ID: <20190528230134.27007-4-f.fainelli@gmail.com> (raw)
In-Reply-To: <20190528230134.27007-1-f.fainelli@gmail.com>
Fix the bulk of the unit_address_vs_reg warnings and unnecessary
\#address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm11351.dtsi | 12 ++++++------
arch/arm/boot/dts/bcm21664-garnet.dts | 2 +-
arch/arm/boot/dts/bcm21664.dtsi | 10 +++++-----
arch/arm/boot/dts/bcm23550-sparrow.dts | 2 +-
arch/arm/boot/dts/bcm23550.dtsi | 8 ++++----
arch/arm/boot/dts/bcm28155-ap.dts | 2 +-
6 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index b99c2e579622..6197e7d80e3b 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -100,7 +100,7 @@
reg-io-width = <4>;
};
- L2: l2-cache {
+ L2: l2-cache@3ff20000 {
compatible = "brcm,bcm11351-a2-pl310-cache";
reg = <0x3ff20000 0x1000>;
cache-unified;
@@ -225,21 +225,21 @@
#size-cells = <1>;
ranges;
- root_ccu: root_ccu {
+ root_ccu: root_ccu@35001000 {
compatible = "brcm,bcm11351-root-ccu";
reg = <0x35001000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "frac_1m";
};
- hub_ccu: hub_ccu {
+ hub_ccu: hub_ccu@34000000 {
compatible = "brcm,bcm11351-hub-ccu";
reg = <0x34000000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "tmon_1m";
};
- aon_ccu: aon_ccu {
+ aon_ccu: aon_ccu@35002000 {
compatible = "brcm,bcm11351-aon-ccu";
reg = <0x35002000 0x0f00>;
#clock-cells = <1>;
@@ -248,7 +248,7 @@
"pmu_bsc_var";
};
- master_ccu: master_ccu {
+ master_ccu: master_ccu@3f001000 {
compatible = "brcm,bcm11351-master-ccu";
reg = <0x3f001000 0x0f00>;
#clock-cells = <1>;
@@ -261,7 +261,7 @@
"hsic2_12m";
};
- slave_ccu: slave_ccu {
+ slave_ccu: slave_ccu@3e011000 {
compatible = "brcm,bcm11351-slave-ccu";
reg = <0x3e011000 0x0f00>;
#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
index 8b045cfab64b..be468f4adc37 100644
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ b/arch/arm/boot/dts/bcm21664-garnet.dts
@@ -21,7 +21,7 @@
model = "BCM21664 Garnet board";
compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 758daa334148..3cf66faf3b56 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -90,7 +90,7 @@
reg-io-width = <4>;
};
- L2: l2-cache {
+ L2: l2-cache@3ff20000 {
compatible = "arm,pl310-cache";
reg = <0x3ff20000 0x1000>;
cache-unified;
@@ -295,21 +295,21 @@
clock-frequency = <156000000>;
};
- root_ccu: root_ccu {
+ root_ccu: root_ccu@35001000 {
compatible = BCM21664_DT_ROOT_CCU_COMPAT;
reg = <0x35001000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "frac_1m";
};
- aon_ccu: aon_ccu {
+ aon_ccu: aon_ccu@35002000 {
compatible = BCM21664_DT_AON_CCU_COMPAT;
reg = <0x35002000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "hub_timer";
};
- master_ccu: master_ccu {
+ master_ccu: master_ccu@3f001000 {
compatible = BCM21664_DT_MASTER_CCU_COMPAT;
reg = <0x3f001000 0x0f00>;
#clock-cells = <1>;
@@ -323,7 +323,7 @@
"sdio4_sleep";
};
- slave_ccu: slave_ccu {
+ slave_ccu: slave_ccu@3e011000 {
compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
reg = <0x3e011000 0x0f00>;
#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/bcm23550-sparrow.dts
index 1c66b15f3013..ace77709f468 100644
--- a/arch/arm/boot/dts/bcm23550-sparrow.dts
+++ b/arch/arm/boot/dts/bcm23550-sparrow.dts
@@ -45,7 +45,7 @@
bootargs = "console=ttyS0,115200n8";
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
index 701198f5f498..a36c9b1d23c8 100644
--- a/arch/arm/boot/dts/bcm23550.dtsi
+++ b/arch/arm/boot/dts/bcm23550.dtsi
@@ -371,21 +371,21 @@
clock-frequency = <156000000>;
};
- root_ccu: root_ccu {
+ root_ccu: root_ccu@35001000 {
compatible = BCM21664_DT_ROOT_CCU_COMPAT;
reg = <0x35001000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "frac_1m";
};
- aon_ccu: aon_ccu {
+ aon_ccu: aon_ccu@35002000 {
compatible = BCM21664_DT_AON_CCU_COMPAT;
reg = <0x35002000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "hub_timer";
};
- slave_ccu: slave_ccu {
+ slave_ccu: slave_ccu@3e011000 {
compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
reg = <0x3e011000 0x0f00>;
#clock-cells = <1>;
@@ -398,7 +398,7 @@
"bsc4";
};
- master_ccu: master_ccu {
+ master_ccu: master_ccu@3f001000 {
compatible = BCM21664_DT_MASTER_CCU_COMPAT;
reg = <0x3f001000 0x0f00>;
#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index fbfca83bd28f..ead6e9804dbf 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -21,7 +21,7 @@
model = "BCM28155 AP board";
compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
--
2.17.1
next prev parent reply other threads:[~2019-05-28 23:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-28 23:01 [PATCH 0/7] ARM: dts: Broadcom: Fix W=1 DTC warnings Florian Fainelli
2019-05-28 23:01 ` [PATCH 1/7] ARM: dts: Fix BCM7445 " Florian Fainelli
2019-06-11 21:53 ` Florian Fainelli
2019-05-28 23:01 ` [PATCH 2/7] ARM: dts: Cygnus: Fix most DTC W=1 warnings Florian Fainelli
2019-06-11 21:54 ` Florian Fainelli
2019-05-28 23:01 ` Florian Fainelli [this message]
2019-06-11 21:54 ` [PATCH 3/7] ARM: dts: bcm-mobile: " Florian Fainelli
2019-05-28 23:01 ` [PATCH 4/7] ARM: dts: BCM53573: Fix " Florian Fainelli
2019-06-11 21:54 ` Florian Fainelli
2019-05-28 23:01 ` [PATCH 5/7] ARM: dts: BCM63xx: " Florian Fainelli
2019-06-11 21:56 ` Florian Fainelli
2019-05-28 23:01 ` [PATCH 6/7] ARM: dts: BCM5301X: Fix most " Florian Fainelli
2019-06-11 22:08 ` Florian Fainelli
2019-05-28 23:01 ` [PATCH 7/7] ARM: dts: NSP: Fix the bulk of W=1 DTC warnings Florian Fainelli
2019-06-11 21:58 ` Florian Fainelli
2019-05-30 10:12 ` [PATCH 0/7] ARM: dts: Broadcom: Fix " Stefan Wahren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190528230134.27007-4-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=gregory.0xf0@gmail.com \
--cc=hauke@hauke-m.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).