From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Chen-Yu Tsai <wens@csie.org>,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org, Ryan Pannell <ryan@osukl.com>,
bshah@mykolab.com, linux-sunxi@googlegroups.com,
Jagan Teki <jagan@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-amarula@amarulasolutions.com,
Sergey Suloev <ssuloev@orpaltech.com>
Subject: [PATCH v9 0/9] drm/sun4i: Allwinner A64 MIPI-DSI support
Date: Wed, 29 May 2019 16:26:06 +0530 [thread overview]
Message-ID: <20190529105615.14027-1-jagan@amarulasolutions.com> (raw)
This is v9 version for Allwinner A64 MIPI-DSI support
and here is the previous version set[1].
This depends on dsi host controller fixes which were
supported in this series[2].
All these changes are tested in Allwinner A64 with
2, 4 lanes devices and whose pixel clocks are 27.5 MHz,
30MHz, 55MHz and 147MHz.
Changes for v9:
- moved dsi fixes in separate series on top of A33 [2]
- rebase on linux-next and on top of [2]
Changes for v8:
- rebased on drm-misc change along with linux-next
- reworked video start delay patch
- tested on 4 different dsi panels
- reworked commit messages
Changes for v7:
- moved vcc-dsi binding to required filed.
- drop quotes on fallback dphy bindings.
- drop min_rate clock pll-mipi patches.
- introduce dclk divider computation as like A64 BSP.
- add A64 DSI quark patches.
- fixed A64 DSI pipeline.
- add proper commit messages.
- collect Merlijn Wajer Tested-by credits.
Changes for v6:
- dropped unneeded changes, patches
- fixed all burst mode patches as per previous version comments
- rebase on master
- update proper commit message
- dropped unneeded comments
- order the patches that make review easy
Changes for v5:
- collect Rob, Acked-by
- droped "Fix VBP size calculation" patch
- updated vblk timing calculation.
- droped techstar, bananapi dsi panel drivers which may require
bridge or other setup. it's under discussion.
Changes for v4:
- droppoed untested CCU_FEATURE_FIXED_POSTDIV check code in
nkm min, max rate patches
- create two patches for "Add Allwinner A64 MIPI DSI support"
one for has_mod_clk quirk and other one for A64 support
- use existing driver code construct for hblk computation
- dropped "Increase hfp packet overhead" patch [2], though BSP added
this but we have no issues as of now.
(no issues on panel side w/o this change)
- create separate function for vblk computation
- enable vcc-dsi regulator in dsi_runtime_resume
- collect Rob, Acked-by
- update MAINTAINERS file for panel drivers
- cleanup commit messages
- fixed checkpatch warnings/errors
[1] https://patchwork.freedesktop.org/series/57834/
[2] https://patchwork.freedesktop.org/series/60847/
Jagan Teki (9):
dt-bindings: sun6i-dsi: Add A64 MIPI-DSI compatible
dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback)
drm/sun4i: dsi: Add has_mod_clk quirk
drm/sun4i: dsi: Add Allwinner A64 MIPI DSI support
arm64: dts: allwinner: a64: Add MIPI DSI pipeline
arm64: dts: allwinner: a64-amarula-relic: Add Techstar TS8550B MIPI-DSI panel
[DO NOT MERGE] arm64: dts: allwinner: bananapi-m64: Enable Bananapi S070WV20-CT16 DSI panel
[DO NOT MERGE] arm64: dts: allwinner: a64-pine64-lts: Enable Feiyang FY07024DI26A30-D DSI panel
[DO NOT MERGE] arm64: dts: allwinner: oceanic-5205-5inmfd: Enable Microtech MTF050FHDI-03 panel
.../bindings/display/sunxi/sun6i-dsi.txt | 2 +
.../allwinner/sun50i-a64-amarula-relic.dts | 35 +++++++++++++
.../dts/allwinner/sun50i-a64-bananapi-m64.dts | 31 ++++++++++++
.../sun50i-a64-oceanic-5205-5inmfd.dts | 49 +++++++++++++++++++
.../allwinner/sun50i-a64-sopine-baseboard.dts | 31 ++++++++++++
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 38 ++++++++++++++
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 45 ++++++++++++-----
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 5 ++
8 files changed, 225 insertions(+), 11 deletions(-)
--
2.18.0.321.gffc6fa0e3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2019-05-29 10:56 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-29 10:56 Jagan Teki [this message]
2019-05-29 10:56 ` [PATCH v9 1/9] dt-bindings: sun6i-dsi: Add A64 MIPI-DSI compatible Jagan Teki
[not found] ` <20190529105615.14027-2-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-31 6:59 ` Maxime Ripard
2019-05-31 7:21 ` Jagan Teki
[not found] ` <20190529105615.14027-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-29 10:56 ` [PATCH v9 2/9] dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback) Jagan Teki
[not found] ` <20190529105615.14027-3-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-05-31 7:00 ` Maxime Ripard
2019-05-29 10:56 ` [PATCH v9 5/9] arm64: dts: allwinner: a64: Add MIPI DSI pipeline Jagan Teki
2019-05-31 6:58 ` [PATCH v9 0/9] drm/sun4i: Allwinner A64 MIPI-DSI support Maxime Ripard
2019-05-31 7:25 ` Jagan Teki
2019-05-29 10:56 ` [PATCH v9 3/9] drm/sun4i: dsi: Add has_mod_clk quirk Jagan Teki
2019-05-29 10:56 ` [PATCH v9 4/9] drm/sun4i: dsi: Add Allwinner A64 MIPI DSI support Jagan Teki
2019-05-29 10:56 ` [PATCH v9 6/9] arm64: dts: allwinner: a64-amarula-relic: Add Techstar TS8550B MIPI-DSI panel Jagan Teki
2019-05-29 10:56 ` [DO NOT MERGE] [PATCH v9 7/9] arm64: dts: allwinner: bananapi-m64: Enable Bananapi S070WV20-CT16 DSI panel Jagan Teki
2019-05-29 10:56 ` [DO NOT MERGE] [PATCH v9 8/9] arm64: dts: allwinner: a64-pine64-lts: Enable Feiyang FY07024DI26A30-D " Jagan Teki
2019-05-29 10:56 ` [DO NOT MERGE] [PATCH v9 9/9] arm64: dts: allwinner: oceanic-5205-5inmfd: Enable Microtech MTF050FHDI-03 panel Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190529105615.14027-1-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=airlied@linux.ie \
--cc=bshah@mykolab.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=michael@amarulasolutions.com \
--cc=ryan@osukl.com \
--cc=ssuloev@orpaltech.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).