From: Boris Brezillon <boris.brezillon@collabora.com>
To: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-media@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Hans Verkuil <hverkuil@xs4all.nl>,
Ezequiel Garcia <ezequiel@collabora.com>,
Nicolas Dufresne <nicolas@ndufresne.ca>,
Jonas Karlman <jonas@kwiboo.se>,
devicetree@vger.kernel.org, kernel@pengutronix.de
Subject: Re: [PATCH v3 10/10] media: hantro: allow arbitrary number of clocks
Date: Sat, 1 Jun 2019 11:23:53 +0200 [thread overview]
Message-ID: <20190601112353.132c7f23@collabora.com> (raw)
In-Reply-To: <20190531085523.10892-11-p.zabel@pengutronix.de>
On Fri, 31 May 2019 10:55:23 +0200
Philipp Zabel <p.zabel@pengutronix.de> wrote:
> Dynamically allocate clocks and move clock names out of struct
> hantro_variant. This lifts the four clock limit and allows to use
> ARRAY_SIZE() to fill .num_clocks to reduce the risk of mismatches.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
> ---
> New in v3.
> ---
> drivers/staging/media/hantro/hantro.h | 6 ++----
> drivers/staging/media/hantro/hantro_drv.c | 5 +++++
> drivers/staging/media/hantro/imx8m_vpu_hw.c | 10 ++++++----
> drivers/staging/media/hantro/rk3288_vpu_hw.c | 8 ++++++--
> drivers/staging/media/hantro/rk3399_vpu_hw.c | 12 ++++++++----
> 5 files changed, 27 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/staging/media/hantro/hantro.h b/drivers/staging/media/hantro/hantro.h
> index 295a00d59a5f..0a3b2a8b3e67 100644
> --- a/drivers/staging/media/hantro/hantro.h
> +++ b/drivers/staging/media/hantro/hantro.h
> @@ -25,8 +25,6 @@
>
> #include "hantro_hw.h"
>
> -#define HANTRO_MAX_CLOCKS 4
> -
> #define MPEG2_MB_DIM 16
> #define MPEG2_MB_WIDTH(w) DIV_ROUND_UP(w, MPEG2_MB_DIM)
> #define MPEG2_MB_HEIGHT(h) DIV_ROUND_UP(h, MPEG2_MB_DIM)
> @@ -88,7 +86,7 @@ struct hantro_variant {
> int (*runtime_resume)(struct hantro_dev *vpu);
> const struct hantro_irq *irqs;
> int num_irqs;
> - const char *clk_names[HANTRO_MAX_CLOCKS];
> + const char * const *clk_names;
> int num_clocks;
> const char * const *reg_names;
> int num_regs;
> @@ -182,7 +180,7 @@ struct hantro_dev {
> struct hantro_func *decoder;
> struct platform_device *pdev;
> struct device *dev;
> - struct clk_bulk_data clocks[HANTRO_MAX_CLOCKS];
> + struct clk_bulk_data *clocks;
> void __iomem **bases;
> void __iomem *enc_base;
> void __iomem *dec_base;
> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> index ef2b29d50100..d9624ee9fdc3 100644
> --- a/drivers/staging/media/hantro/hantro_drv.c
> +++ b/drivers/staging/media/hantro/hantro_drv.c
> @@ -688,6 +688,11 @@ static int hantro_probe(struct platform_device *pdev)
>
> INIT_DELAYED_WORK(&vpu->watchdog_work, hantro_watchdog);
>
> + vpu->clocks = devm_kcalloc(&pdev->dev, vpu->variant->num_clocks,
> + sizeof(*vpu->clocks), GFP_KERNEL);
> + if (!vpu->clocks)
> + return -ENOMEM;
> +
> for (i = 0; i < vpu->variant->num_clocks; i++)
> vpu->clocks[i].id = vpu->variant->clk_names[i];
> ret = devm_clk_bulk_get(&pdev->dev, vpu->variant->num_clocks,
> diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> index fbe84c5f5619..811899e8416a 100644
> --- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
> +++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
> @@ -266,6 +266,7 @@ static const struct hantro_irq imx8mq_irqs[] = {
> { "g2", NULL /* TODO: imx8m_vpu_g2_irq */ },
> };
>
> +static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
> static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
>
> const struct hantro_variant imx8mq_vpu_variant = {
> @@ -278,8 +279,8 @@ const struct hantro_variant imx8mq_vpu_variant = {
> .irqs = imx8mq_irqs,
> .num_irqs = ARRAY_SIZE(imx8mq_irqs),
> .num_irqs = 2,
> - .clk_names = { "g1", "g2", "bus" },
> - .num_clocks = 3,
> + .clk_names = imx8mq_clk_names,
> + .num_clocks = ARRAY_SIZE(imx8mq_clk_names),
> .reg_names = imx8mq_reg_names,
> .num_regs = ARRAY_SIZE(imx8mq_reg_names)
> };
> @@ -290,6 +291,7 @@ static const struct hantro_irq imx8mm_irqs[] = {
> { "h1", imx8mm_vpu_h1_irq },
> };
>
> +static const char * const imx8mm_clk_names[] = { "g1", "g2", "h1", "bus" };
> static const char * const imx8mm_reg_names[] = { "g1", "g2", "h1", "ctrl" };
>
> const struct hantro_variant imx8mm_vpu_variant = {
> @@ -301,8 +303,8 @@ const struct hantro_variant imx8mm_vpu_variant = {
> .runtime_resume = imx8mm_runtime_resume,
> .irqs = imx8mm_irqs,
> .num_irqs = ARRAY_SIZE(imx8mm_irqs),
> - .clk_names = { "g1", "g2", "h1", "bus" },
> - .num_clocks = 4,
> + .clk_names = imx8mm_clk_names,
> + .num_clocks = ARRAY_SIZE(imx8mm_clk_names),
> .reg_names = imx8mm_reg_names,
> .num_regs = ARRAY_SIZE(imx8mm_reg_names)
> };
> diff --git a/drivers/staging/media/hantro/rk3288_vpu_hw.c b/drivers/staging/media/hantro/rk3288_vpu_hw.c
> index b4d5e24167db..fe721e0b948d 100644
> --- a/drivers/staging/media/hantro/rk3288_vpu_hw.c
> +++ b/drivers/staging/media/hantro/rk3288_vpu_hw.c
> @@ -165,6 +165,10 @@ static const struct hantro_irq rk3288_irqs[] = {
> { "vdpu", rk3288_vdpu_irq },
> };
>
> +static const char * const rk3288_clk_names[] = {
> + "aclk", "hclk"
> +};
> +
> const struct hantro_variant rk3288_vpu_variant = {
> .enc_offset = 0x0,
> .enc_fmts = rk3288_vpu_enc_fmts,
> @@ -177,6 +181,6 @@ const struct hantro_variant rk3288_vpu_variant = {
> .irqs = rk3288_irqs,
> .num_irqs = ARRAY_SIZE(rk3288_irqs),
> .init = rk3288_vpu_hw_init,
> - .clk_names = {"aclk", "hclk"},
> - .num_clocks = 2
> + .clk_names = rk3288_clk_names,
> + .num_clocks = ARRAY_SIZE(rk3288_clk_names)
> };
> diff --git a/drivers/staging/media/hantro/rk3399_vpu_hw.c b/drivers/staging/media/hantro/rk3399_vpu_hw.c
> index fc52bedf3665..f8400e49bc50 100644
> --- a/drivers/staging/media/hantro/rk3399_vpu_hw.c
> +++ b/drivers/staging/media/hantro/rk3399_vpu_hw.c
> @@ -165,6 +165,10 @@ static const struct hantro_irq rk3399_irqs[] = {
> { "vdpu", rk3399_vdpu_irq },
> };
>
> +static const char * const rk3399_clk_names[] = {
> + "aclk", "hclk"
> +};
> +
> const struct hantro_variant rk3399_vpu_variant = {
> .enc_offset = 0x0,
> .enc_fmts = rk3399_vpu_enc_fmts,
> @@ -177,8 +181,8 @@ const struct hantro_variant rk3399_vpu_variant = {
> .irqs = rk3399_irqs,
> .num_irqs = ARRAY_SIZE(rk3399_irqs),
> .init = rk3399_vpu_hw_init,
> - .clk_names = {"aclk", "hclk"},
> - .num_clocks = 2
> + .clk_names = rk3399_clk_names,
> + .num_clocks = ARRAY_SIZE(rk3399_clk_names)
> };
>
> static const struct hantro_irq rk3328_irqs[] = {
> @@ -194,6 +198,6 @@ const struct hantro_variant rk3328_vpu_variant = {
> .irqs = rk3328_irqs,
> .num_irqs = ARRAY_SIZE(rk3328_irqs),
> .init = rk3399_vpu_hw_init,
> - .clk_names = {"aclk", "hclk"},
> - .num_clocks = 2
> + .clk_names = rk3399_clk_names,
> + .num_clocks = ARRAY_SIZE(rk3399_clk_names),
> };
next prev parent reply other threads:[~2019-06-01 9:23 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-31 8:55 [PATCH v3 00/10] Rename Rockchip VPU driver to Hantro, add initial i.MX8M support Philipp Zabel
2019-05-31 8:55 ` [PATCH v3 01/10] rockchip/vpu: rename from rockchip to hantro Philipp Zabel
2019-06-05 11:22 ` Boris Brezillon
2019-06-06 15:06 ` Boris Brezillon
2019-06-11 11:51 ` Philipp Zabel
2019-05-31 8:55 ` [PATCH v3 02/10] media: hantro: print video device name in addition to device node Philipp Zabel
2019-05-31 8:55 ` [PATCH v3 03/10] media: hantro: add PM runtime resume callback Philipp Zabel
2019-05-31 8:55 ` [PATCH v3 04/10] media: hantro: make irq names configurable Philipp Zabel
2019-06-01 9:07 ` Boris Brezillon
2019-05-31 8:55 ` [PATCH v3 05/10] media: hantro: add support for named register ranges Philipp Zabel
2019-06-01 9:14 ` Boris Brezillon
2019-05-31 8:55 ` [PATCH v3 06/10] media: hantro: add support for separate control block Philipp Zabel
2019-06-01 9:16 ` Boris Brezillon
2019-05-31 8:55 ` [PATCH v3 07/10] media: dt-bindings: Document i.MX8MQ and i.MX8MM VPU bindings Philipp Zabel
2019-06-01 9:18 ` Boris Brezillon
2019-06-11 12:44 ` Philipp Zabel
2019-05-31 8:55 ` [PATCH v3 08/10] media: hantro: add initial i.MX8MQ support Philipp Zabel
2019-06-03 12:45 ` Hans Verkuil
2019-06-03 20:02 ` Boris Brezillon
2019-06-04 10:42 ` Hans Verkuil
2019-06-11 11:55 ` Philipp Zabel
2019-12-01 2:16 ` Adam Ford
2019-05-31 8:55 ` [PATCH v3 09/10] media: hantro: add initial i.MX8MM support (untested) Philipp Zabel
2019-06-03 12:54 ` Hans Verkuil
2019-06-03 18:59 ` Nicolas Dufresne
2019-06-03 18:59 ` Nicolas Dufresne
2019-06-11 11:52 ` Philipp Zabel
2019-05-31 8:55 ` [PATCH v3 10/10] media: hantro: allow arbitrary number of clocks Philipp Zabel
2019-06-01 9:23 ` Boris Brezillon [this message]
2019-06-03 12:40 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190601112353.132c7f23@collabora.com \
--to=boris.brezillon@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=jonas@kwiboo.se \
--cc=kernel@pengutronix.de \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nicolas@ndufresne.ca \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).